Feature:

1. LED BDM frame full set, it consists of a acrylic board, Mesh and 4 Probe pens, etc.
   
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED, it will work. The probe pin is adjustable.
   
3. Best bracket for ECU update/ECU brush and write/ECM modified and programming/probe holder/for Dimsport aids.
   
4. It works with for KESS/KTAG/FGTECH/BDM100/100/CMD/DIMSPORT AIDS and othe ECU chip tuning tools.
   
5. Simple designed, easy to use, much better than the old BDM frame.

Specifications:

Features: 

AiXun T3A is the world's first 200w full intelligent soldering station. It's compatible with T12/T245 two handles, and can be applicated to various scenes. With the smart temperature control system, it can quickly heat to 380℃ within 3 seconds with the temperature accuracy deviation less than 1%. It is most suitable for mobile maintenance and precise welding of high-end electronice products. The 2.4 inch LCD digital color display provides you better visual enjoyment, which is benefit for you to improve working efficiency. The smart operator habit memory can help prolong the service life of welding station and soldering tips. It is a must have soldering station especially for cellphone repair shop.

10 advantages of T3B soldering station:

1. Connect to the AiXun platform to update automatically, and the software of the soldering station can be upgraded infinitely.

2. 210/115 soldering tip nano-precision welding, extremely fast heating for 2 seconds to melt tin.

3. Intelligent identification of soldering target and environment, intelligent power compensation, automatic protection. 

4. 2.4-inch color screen display, adjustable temperature from 100-450 degrees, with real-time stand by function.

5. Support T210, T115 two handles, automatically identify the model and working status.

6. Personal habit temperature self-memory, three-channel temperature switch quickly, adjust with knob.

7. The main station has a built-in ambient temperature sensor to avoid high temperature operation.

8. Automatic recording of working time, automatic reminder of fatigue work.

9. Super anti-static isolation design to meet industrial ESD standards.

10. Connect to the AiXun platform to customize the personalized boot interface.

The advantages of AiXunT3B soldering station

AiXun T3B 200W Smart Micro Soldering Station supports T210 and T115 handles and is specially designed for nano-precision component soldering. Using the most advanced intelligent temperature control system, it only takes 2 seconds to heat the temperature to 380 ℃, and the temperature accuracy deviation is less than 1%. The 2.4-inch large LCD color display screen helps the operator to easily understand the current working status and temperature. The temperature is adjustable from 100-450℃, and the strong anti-static design conforms to the industrial ESD standard. Remote software upgrade is a unique feature of all AiXun products. It is a rework soldering station for electronic parts repair. 

OBDSTAR RH850/V850 Adapter

OBDSTAR RH850/V850 Adapter is For Airbag Reset, IMMO Data/Pincode Read(Dashboard, BCM, ELV, etc. )
Need work with X300 G3, P50 together
All data read is unencrypted and can be used on the third party devices.

Functions:

Volkswagen MQB48-5A key programming (components removing free) (MQB49-5C under development)
Ford/Lincoln 2021-key programming (including all keys lost)
Nissan/Renault key programming (including all keys lost)
FCA key programming (upcoming upgrade)
Supports the data reading/writing and repair of the new SRS ECU with encrypted RH850 processor

Package includes:

1pc x C4-06 Adapter
1pc x W010 Cable
1pc x W010A Adapter
1pc x C4-06-C01 Adapter
1pc x C4-06-C02 Adapter
5sets x dedicated decryption jumper

• Gets your soldering job done faster
• Easy to handle high performance iron
• Intuitive navigation
• Low total cost of ownership
• Safe handling: ESD safe heat-resistant silicon cable
• Reinforced safety rest for secure iron storage
• Temperature stability and temperature lock protects tips and components and allows reliably high quality, repeatable soldering results
• Standby mode and auto setback conserves energy, protects equipment
• Password-protected to preserve settings
• Automatic set-back saves energy and preserves tip

The digital 70 W WE soldering station is 40% more powerful than the WES / WESD station. This allows the iron to heat up faster and to provide a faster recovery time – gets the job done quicker with more efficiency and precision.

1. Supports 46, 4D data collection;
2. Supports PORSCHE(2005-2010) 46 Pincode decryption;
3. Supports HYUNDAI/KIA 46 Pincode decryption;
4. Supports TOYOTA DSTAES(8A-H) Blade key simulation;
5. Supports SUBARU DSTAES(8A-H) Blade key simulation;
6. Supports TOYOTA DST40(94/D4) Smart key simulation;
7. Supports TOYOTA DST80(98) Smart key simulation;
8. Supports SUBARU DST80(F1/78) Smart key simulation;
9. Supports TOYOTA DSTAES(8A-88/8A-A8) Smart key simulation(all year models);
10. Supports TOYOTA DSTAES(8A-A9) Smart key simulation(all year models);
11. Supports TOYOTA DSTAES(8A-39) Smart key simulation;
12. Supports TOYOTA DSTAES(8A-AA) Smart key simulation(all year models);
13. Supports TOYOTA 4A Smart key simulation;
More features are under development...

This cable allows you to test EIS and ELV without having the car.

The Mercedes EIS testing cable is used to test Mercedes EIS, replace Mercedes EIS, program spare keys, program all keys lost for Mercedes EIS. With this cables, you can test the key on the table if it is working or not after programming, And you can Read the EIS Data by OBD or BY IR Tool without the Car by the VVDI MB BGA, just connect the EIS and ESL with the MB EIS testing cable.

Mercedes Benz EIS testing cable saves a lot of hard work time.
Using the Mercedes Benz testing cable will let you be sure 100% about your key programming.
Mercedes Benz EIS / ELV testing cable can be used to program Mercedes ELV unit Mercedes ELV emulator.

Work with:

• Xhorse
• ZedFull
• Autel
• Abrites
• CGDI

Highlights of GODIAG GT100:

1. GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding.
2. It can convert the car OBD2 interface into 6 pin for signal detection. 
3. Able to connect the single modules or multiple modules of the vehicle.  
4. Connect with any diagnostic tool to tell whether the car communication is good or not. 
5. Supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, key remote control fails or the fault light turns on. 
6. One Year Warranty.
7. Work together with Xhorse VVDI2, Autel devices, Launch, Foxwell etc.
8. BMW CAS4 Test Platform function will be coming soon, and also will develop the connection cable for Benz and Chrysler, please wait.

GODIAG Full Protocol OBD2 Jumper Functions:
 
1. Supports DC power supply
2. Support safety protection banana head super programming dedicated connection port power supply.
3. Independent GND4, GND5 [meet the needs of special ECU programming].
4. With boot GND4 clip, compatible with programming equipment such as MPPS, FGTECH, KESSV2.
5. With GND4 GND5 short-circuit switch [some ECUs need to be switched to short-circuit mode when programming].
 
Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch.
 
6. With ignition analog switch [equipped with 1 large and 2 small dedicated ignition cables].
7. Support standard obd2 full protocol connection [double K line, double CAN line], 3 large and 2 small power plugs, 4 large GND, 4 small GND.
8. Equipped with CAN protocol communication resistance.

What is the analog ignition switch?
 
After the ING ignition switch is pressed, the line marked with ING12V will have 12v, which is the analog ignition switch. Because when some devices read some ECUs, the device will prompt to turn on or off the ignition switch.

Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

 GODIAG Full Protocol OBD2 Jumper Cable is used to connect ECU, Immobilizer, ABS, Airbag, Instrument cluster via OBD or bench easily
The jumper is compatible with lots of OBD2 devices, ECU programmers, key programmers, airbag reset tools and mileage programmers.
can work with Key Tool Plus, Autel IM608 II, Launch Tablet Diagnostic,CGDI, OBDSTAR, KESS V2. 

The CAN FD Adapter from Autel is designed to connect to compatible vehicle communication interfaces (VCIs) to enable its tablets to communicate via the CAN FD (flexible data-rate) communications protocol and diagnose the vehicle. Vehicles currently using the CAN FD  protocol include many General Motors and Ford 2019 and 2020 vehicles. Autel's MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908S, MS908P, MS908SP, MSELITE, IM508, and IM608 tablets will be able to diagnose CAN-FD equipped vehicles when the adapter is plugged into the VCI directly as in the case of the smaller VCI units or into the OBD-II cable that is connected to the larger VCIs and into the vehicle's OBD-II port.