Highlights:

1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

• DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
• Ignition simulated start switch.
• Immobilizer dashboard simulated indicator.
• Key sensing area.
• Screw bolt.
• Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
• Godiag OEM dedicated CAS4 CAS4+ start control adapter. 

GODIAG BMW FEM/BDC Test Platform

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

Programming Device AutokeyUnlocker PCF79Xx

Autel PowerScan PS100 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can:
1. Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
Test for continuity with its built-in auxiliary ground lead.

2. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
3. Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
4. PS100 follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.

Autel PowerScan PS100 Feature and Functions:

Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc. Simultaneously uses the hot lead and the ground lead to activate components right in your hand Instantly identifies positive, negative and open circuits Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses Instantly checks continuity of switches, relays and diodes Circuit breaker protected Built-in Flashlight enables you to work in the dark Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment 20ft (extendable) cable provides excellent accessibility to test along the vehicle Extremely easy to use and highly reliable.

Autel PowerScan PS100 Specification:

Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery

Autel PowerScan PS100 Package List:

1pc x PS100 main unit
1pc x Probe Tip
1pc x 20ft. Externsion cable
1pc x Cigarette lighter adapter
1pc x Battery hookup clips
1pc x User Manual
1pc x Rugged blow molded case

Autel Nissan 16+32 Secure Gateway Adaptor for IM608 Pro and IM508

Make electronics repair and soldering simple with this powerful and reliable hot air rework station. The 858D is perfect for beginners, hobbyists, and DIY enthusiasts who need a dependable hot air soldering station that’s easy to use for SMD (surface mount device) components and other small electronic projects. 

• Output Power: 700W – heats up quickly for fast, efficient work.
• Temperature Range: Adjustable from 100 ℃ to 450 ℃ for use on delicate components or heavy-duty jobs.
• Air Flow: Max. 120L/min, powered by a gentle, brushless fan for smooth, even air delivery.
• Low Noise: Operates at less than 45dB for a quiet workspace.
• LED Digital Display: See the current temperature and settings clearly at a glance.

 GODIAG BDC3 Adapter Kit acts as a professional bridge between BMW vehicle keys and mainstream key programming tools. It supports safe, solder-free reading, writing, and programming for BMW BDC03, encrypted BCP U keys, and BDC3 LCD keys, widely used for G‑Chassis and U‑Chassis models.

GODIAG BDC3 Adapter Kit Feature: 

• Each probe is fitted with a protective sleeve. If a probe needle bends during use, it can be easily pulled out and replaced. This also allows for quick replacement if the needle is damaged during shipping. The sleeve improves durability and greatly lowers the risk of breakage.
• Equipped with an adjustment screw. If clamping pressure is too high, users can adjust the screw to reduce pressure on the probe.
• Built-in DIY connection interface enables flexible connection according to users’ existing equipment, supporting compatibility with other devices in the future. The Autel-compatible adapter includes silicone soldering wire, allowing users to solder various key types or read/write chips as required.
• Certain encrypted keys used with Xhorse devices require a small dedicated chip. Our Xhorse adapter board integrates this chip to support reading and writing encrypted keys, and is also equipped with an indicator light for status feedback.

KEYDIY BMW BDC03 Specific Dismantling-free Clip Adapter

KEYDIY BMW BDC03 Clip Adapter is a professional, solder-free test clip designed exclusively for BMW G-series BDC03/BDC3 (2951/2953B) keys. It enables fast, non-destructive data reading and writing without disassembly or soldering, greatly improving efficiency for auto locksmith key programming.

KD BDC03 Dismantling-free Clip Adapter Feature:

• Professional dismantling-free clip adapter designed for BMW G-series BDC03/BDC3 keys.
• No soldering needed for KD FGB23 flip keys.
• Works perfectly with KEYDIY KD-X4, KD-MAX and other BDC3 supported devices.
• Wire color may vary by version.

Highlights:

• 100% dismantling-free & solder-less: No need to open the key shell or solder, avoiding PCB damage
• Precision BDC03/BDC3 exclusive design: Perfectly fits OEM BDC03 and KD FGB23 keys
• Compatible with KD-X3 / KD-MAX / KD-X4 programmers: Plug-and-play operation
• High-stability pogo pins: Reliable contact for fast data read/write
• Safe & reusable: Ideal for daily locksmith use, saves time and reduces operation risks

NOTE:
No soldering requires for BMW G series BDC3 flip type keys (KD FGB23 style).
Still need soldering for U series BDC3 key type (KD FGB57 style).

 KD-MATE is car key program device based on mobile KD app connection. With the matched adapter cable in the package, it can realize the Toyota smart key programming without pincde, and also can add Toyota all lost key without simulator. 

The device is updated iteratively with mobile KD app, it opens the communication channel between KD device and vehicle system, works with KD-X2/KD-MAX and KD remotes.

Functions supported now:

• Toyota (after year 2019) Hitag-AES (4A) smart key programming without pincode and all key lost programming without simulators (ZB remote emergency igniton), including new Toyota Corolla and Levin with 2000 FCCID.
• 4D smart key (including 0111/0140/0780/5380/7990) adding, all key lost and emergency ignition (4D transponder emergency ignition).
• 8A smart key (including 0020/2110/F43/3330/0410/0440/0010/0120) programming without pincode. 

GODIAG For BMW BDC3/BCP 

GODIAG for BMW BDC3/BCP Programming Test Platform streamlines immobilizer system management, key synchronization, and module diagnostics with unmatched reliability. All these powerful functions make it the ultimate all-in-one solution for professional engineers. GODIAG for BMW BDC3/BCP Programming Test Platform is your gateway to faster, safer, and more efficient diagnostics. Whether you're working on key synchronization, module programming, or instrument maintenance, this platform has got you covered.

 Test Platform Functions:

1. Used to detect whether the key and module are synchronized.
2. After the key and module are synchronized, the corresponding immo indicator light will light up and there will be a sound prompt.
3. The module off-vehicle diagnostic programming and coding are convenient for engineers to operate and can avoid the risk of other modules of the car being damaged.
4. The key sensor identification light is convenient for detecting the key and module identification.
5. The instrument lights up for instrument detection and maintenance.
6. Key remote control function and module synchronization test.
7. It supports ENET communication and can perform diagnostics, programming and coding on the BDC3 module.
8. It supports CAN BUS module communication and can perform diagnostics and programming on the BDC3 module.
9. Use Autel IM608 device and Autel BDC3 key with Autel BDC3 key addition authorization to add keys to the BDC3 module.
10. Connect to BMW dedicated diagnostic equipment icom, GT109 for ENET communication.
11. Connect to Autel, Launch tablets that supports BMW diagnostics for diagnostics, programming, and other functions.
12. Key intelligent recognition test, check whether the intelligent synchronization function of the BDC3 module is normal.

  Product Functions: