This is a 3 Piece Adapter set for reading BMW MEVD17.2.x data 

Using these adapters, you can connect to the DME on the bench. With the Autel IM608 programmer tool and the Autel G BOX2, read the DME ISN(no need to open the DME) or clone the DME.

 If you are a locksmith, this is useful when performing All Keys Lost. You don't have to spend time removing the DME from the vehicle. You just need to pull out the original DME female connector and insert the adapter into the DME to get the ISN through the Autel G BOX2  and Autel IM608

Includes:

• BMW MEVD17.2.x  N13 & N20 DME Adapter
• BMW MEVD17.2.x  BM38 DME Adapter
• BMW MEVD17.2.x  N55 DME Adapter

for Autel GBOX2 and IM Tools

The EEPROM Clip Adapter Use appropriate CLIP CABLE to clip to the chip ensure reliable electrical connection. Some circuit boards need use the PROBE

• No Soldering Required
• SOP8 Clip Cable
• DIP8 Clip Cable
• Probe
• EEPROM Clip Adapter

Specs:

Manufacturer: Xhorse
Condition: New
Color: Green

Xhorse VVDI Prog EEPROM Clip adapter overview:

The Xhorse VVDI Prog EEPROM Clip adapter XDPG12 support in-circuit chip read & write for SOP8 / DIP8 Eeprom

Xhorse VVDI Prog EEPROM Clip adapter set supported EEPROM :

• Xhorse VVDI Prog 24Cxx read/write
• Xhorse VVDI Prog 25xxx read/write
• Xhorse VVDI Prog 93Cx6 read/write
• Xhorse VVDI Prog 93Sx6 read/write
• Xhorse VVDI Prog 95xxx read/write
• Xhorse VVDI Prog S29x90 read/write
• Xhorse VVDI Prog ST95P0x read/write
• etc...

Xhorse VVDI Prog EEPROM adapter set XDPG12 contains:

• Xhorse VVDI Prog EEPROM Clip Adapter
• Xhorse VVDI Prog sop8 Clip Cable
• Xhorse VVDI Prog DIP8 Clip Cable
• Xhorse VVDI Prog EEPROM Probe
•  

Package includes:

EEPROM Adapter - SOP8 Clip Cable - DIP8 Clip Cable - Probe
In circuit Read/Write EEPROM chip of SOP8/DIP8 package.

Support Type:

24CXX - 25XXX - 93CX6 - 93SX6 - 95XXX - S29X90 - ST95P0X etc ...

GODIAG BMW FEM/BDC Test Platform

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

BDSTAR P003 Adapter with ECU Bench Cables

For reading BOSCH ECU data, CS, PIN code etc., including Audi, Citroen, DS, Mahindra, Peugeot, Skoda, SEAT, Volkswagen etc.

Works together with OBDSTAR X300 DP/ X300 DP PLUS/ X300 PRO4/ DC706/ D800

OBDSTAR P003 Kit Supported ECU List:

Supports ECU including BOSCH EDC17U01(TC1766), MED17.5(TC1766), MED17.5.1(TC1766), MED17.5.20(TC1766), MED17.5.5(TC1766), MED17.5.5 HW2(TC1766), EDC17C46(TC1767), ME17.5.6(TC1767), ME17.5.20(TC1767), MED17.5.2(TC1767), MED17.5.5(TC1767), MED17.5.5 HW2(TC1767), MED17.5.21(TC1782), MED17.5.25(TC1782), EDC17C54(TC1797), EDC17C64(TC1797), EDC17CP44(TC1797), EDC17CP44 MS(TC1797), ME17.1.1(TC1797), ME17.1.6(TC1797), MED17.1.1(TC1797), MED17.1.1 MS(TC1797), MED17.1.6(TC1797), MED17.4.4(TC1793), MD1CS018(Euro 6/TC298TP), MG1CS042(Euro 6/TC298TP), MG1CS003(Euro 6/TC298TP) etc.

Continental PCR2.1(TC1796)

2010-2014 Audi A1 (8X) 1.6L Diesel

2009-2012 Audi A3 (8P) 1.6L Diesel

2009-2013 Seat Altea 1.6L Diesel

2010-2016 Seat Ibiza IV (6J) 1.6L Diesel

2010-2012 Seat Leon II 1.6L Diesel

2014 Seat Toledo (KG) 1.6L Diesel

2010-2013 Skoda Octavia II (1Z) 1.6L Diesel

2010-2013 Skoda Fabia II (5J) 1.6L Diesel

2010-2011 Skoda Roomster (5J) 1.6L Diesel

2013-2014 Skoda Rapid (NH) 1.6L Diesel

2011-2013 Skoda Superb (3T) 1.6L Diesel

2012/2015 Skoda Yeti (5L) 1.6L Diesel

2010-2015 VW Caddy (2K) 1.6L Diesel

2009-2013 VW Golf VI 1.6L Diesel

2010-2013 VW Golf Plus 1.6L Diesel

2011-2014 VW New Beetle (9C) 1.6L Diesel

2011 VW Passat (B7) 1.6L Diesel

2009-2014 VW Polo V 1.6L Diesel

2010-2015 VW Touran (1T) 1.6L Diesel

2. Bosch MED17.4.4(TC1793)

Citroen C3 Mk2

Citroen C4 Gran Picasso

Citroen C4 MK2

Citroen C5 (RD/TD)

Citroen C6

DS DS3

DS DS5

DS DS6

Peugeot 2008

Peugeot 208

Peugeot 3008 (P84)

Peugeot 3008 (T84)

Peugeot 308 (T9)

Peugeot 4008

Peugeot 408

Peugeot 508

3. Bosch EDC17C60(TC1793)

Citroen Berlingo

Citroen C-Elysee

Citroen C3 Aircross

Citroen C3 MK2

Citroen C3 Picasso

Citroen C4 Cactus

Citroen C4 MK2

Citroen C4 Picasso

Citroen Jumpy

Citroen Spacetourer

DS DS3

DS DS4

DS DS5

Peugeot 2008

Peugeot 208

Peugeot 3008 (P84)

Peugeot 308 (T9)

Peugeot 5008 (T87-P87)

Peugeot 508

Peugeot Expert

Peugeot Ranch/Partner

Peugeot Traveller

Opel/Saturn/Vauxhall Combo E

Opel/Saturn/Vauxhall Crossland X

Opel/Saturn/Vauxhall Grandland X

ToyotaProace

4. Bosch MD1CS018

Mahindra BS-6

5. Bosch MED17XX/EDC17XX

EDC17U01(TC1766)

EDC17C46(TC1767)

EDC17C54(TC1797)

EDC17C64(TC1797)

EDC17CP44(TC1797)

EDC17CP44 MS(TC1797)

MED17.5(TC1766)

MED17.5.1(TC1766)

MED17.5.20(TC1766)

MED17.5.5(TC1766)

MED17.5.5 HW2(TC1766)

MED17.5.2(TC1767)

MED17.5.5(TC1767)

MED17.5.5 HW2(TC1767)

MED17.5.21(TC1782)

MED17.5.25(TC1782)

MED17.1.1(TC1797)

MED17.1.1 MS(TC1797)

MED17.1.6(TC1797)

VW/Skoda/Audi/Seat, Bentley, Lamborghini, Porsche...

6. Bosch ME17XX

ME17.5.6(TC1767)

ME17.5.20(TC1767)

ME17.1.1(TC1797)

ME17.1.6(TC1797)

VW/Audi/Skoda/Seat, Bentley...

OBDSTAR P003 Kit Functions

1. Continental PCR 2.1 reading CS, PinCode, MAC valueP003 KIT
2. Bosch MED17.4.4 reading eeprom , PinCodeP003 KIT
3. Bosch EDC17C60 reading eeprom , PinCodeP003 KIT
4. Bosch MD1CS018 reading eeprom, PinCodeP003 KIT
5. Bosch MED17XX/EDC17XX reading eeprom, flash, CS, PinCode, MAC value
6. Bosch ME17XX reading & writing eeprom, flash
7. T87A, 6HP reading & writing TCM eeprom, flash

Bench Mode:
Step 1: Connect 1, 2, 3 together as pic below;

Step2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step3: connect 12V power with diagnostic device;
Step4: read data

Boot Mode:
Step 1: Connect 1, 2, 3 together as pic below;
Step2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step3: connect 7 with 4 or 5 and connect it to ECU;
Step4: connect 12V power with diagnostic device;
Step5: read data on diagnostic device.

Package List (work with X300 DP/ X300 DP PLUS/ X300 PRO4):

1pc x  P003 adapter
1 set x  ECU BENCH cables

OBDSTAR DC706 ECU Tool Full Version

Attention:
Does not clone VAG DQ250 before year 2008. 
Please register the device before using.

Instructions for registration.

Distributor code is 0086A002.

OBDSTAR DC706 ECU tool is designed for vehicle ECM, TCM and body/other system for ECU programming.  It can read ECU info, R/W Eeprom/Dflash/Pflash/MAP, reset ECU(Virgin), calibrate mileage, read IMMO PIN code, ECU recovery and so on. It's all by OBD or BENCH mode and makes ECU cloning easy.

OBDSTAR DC706 Functions

ECU Clone/ All by OBD or Bench
ECM clone for cars(Bosch, Continental, Delphi, Denso, Magneti Marelli, Siemens...)
ECM clone for motorcycles(Bosch, Delphi, EFI...)
TCM clone(Ac Delco, Bosch, Continental, Getrag, GM, Kefico, Siemens, Temic, ZF...)
Body/Other clone(FCA, FIAT, FORD, GM/OPEL, LAND ROVER/JAGUAR, PSA, SMART, VOLVO...)

Supported ECU Manufacturers

    ALPS
    Autoliv
    Bosch
    Continental
    Delphi
    Denso
    Johnson Controls
    Lear
    Magneti Marelli
    Siemens
    Temic
    Valeo

Supported Brands

Car:

 ASTON MARTIN
    BMW
    FAW
    FCA(ALFA ROMEO, CHRYSLER, DODGE, FIAT...)
    FORD/LINCOLN
    GM/OPEL
    HYUNDAI/KIA
    LAND ROVER/JAGUAR
    LUXGEN
    MASERATI
    MAZDA
    MITSUBISHI
    NISSAN
    OPEL
    PSA
    SMART
    SUBARU
    SUZUKI
    VOLVO
    VW/AUDI/SEAT/SKODA


Motorcycle:

    APRILIA
    BRP
    CFMOTO
    DERBI
    GILERA
    GUZZI
    PEUGEOT
    PIAGGIO
    QJBENELLI
    VESPA


Advanced Functions

1. R/W eeprom/dflash/pflash/Map, reset ECU(Virgin), calibrate mileage, read IMMO pincode, ECU recovery...
2. Support 200+ ECM types(Partial functions require P003 adapter.)
3. Support dozens of TCM types
4. Support 100+ body/other ECU types(AIRBAG, BCM, BSI, CEM, DDM/PDM, DIM, EPS, KeyLess(RFHUB/RFHM), KVM, RFA, SAM...)
5. Support VW DQXXX (TCM) calibrate mileage
6. Support motorcycle Delphi MT05, MT05.2, MT05.3 ECU clone
7. Support motorcycle BRP ME17.8.5 ECU clone (works with P003 adapter.)
8. Support Piaggio series engine ECU clone(such as MIU G4 (M4G1))
9. Support intelligent search by brand, model, part No., ECU manufacturer, MCU controller type
10. Support automatic identification
11. Strong help data files
12. All by OBD or Bench mode

Attention:

If you need YANWEN express shipping or other shipping methods like UPS, TNT, FedEx and so on, or you have special needs for your order, such as a declared name and so on, please leave a message on the order to notify us. Otherwise we will send the order as our usual practice.

As different countries have different import policies, sometimes we will change the shipping method based on the counties and goods.

When you receive the parcel, before you sign for acceptance, please check the package first to make sure the product is correct and undamaged.
After Sale Service:

If you have any problems, please do not hesitate to contact us. Please give us your detailed description, or error photo. We will provide the solution or solve it for you by teamviewer. For some special function, you can take the photo or video and then send it to us to check whether you operate it rightly.

OBDSTAR G3 full additional functions like those of DC706

ODO METER

• IB1.1: Car ODO METER
• B1.2: MOTO ODO METER
• B2.1: Oil/Service Reset

ECU Flasher

• IC1.1: CAR ECM
• IC1.2:CAR TCM
• C1.3: CAR BODY
• C2.1: MOTO ECM

Crash Reset

• (D1.1: Battery Reset (MVBM)
• ID1.2: Airbag Reset
• ID1.3: SAS Reset

Test Platform

• E1.1: Dash Board
• E1.2: E-CAR ABS
• E1.3: Gear Lever
• IE1.4: A/C panel
• E15: E-CAR BSG
• IE1.6: F-CAR MHEV
• F1.7. F-CAR AUDIO
• F1 8. F-CAR EBA

Supported vehicle types

Car, HD, E-Car, MOTO, Marine (jet-ski)

Software functions

Support Programming IMMO(Keys), Remote Test, R/W Transponder, Make Dealer Keys, Make Start Keys, Renew Key, IMMO OFF, R/W EEPROM/MCU, Unlock ECU, ECU Advanced, OBD II etc.

Hardware Advantages

1. Built in CAN-FD, Low Speed(Fault Tolerant) CAN, OBD16 Pinout Switch, DOIP, Remote Test and RFID;

2. RK3568 Hexa-Core Processor, 4G+64G Capacity Storage, High-brightness Display, HDMI High-definition Interface, Dual-band 2.4/5GHZ WIFI, Bluetooth 5.0, STM32H723 High Performance VCI Processor.

Advanced Functions

1. Support MOTO key progarmming (no need pincode) function for HARLEY, TRIUMPH, DUCATI, KAWASAKI, HONDA, SUZUKI, YAMAHA, BRP, INDIAN, DAYANG, APRILIA, PIAGGIO, VESPA, DERBY, GIRELLA, GUZZI, PEUGEOT, ITAJET and others;

2. Support Marine key progarmming function for BRP, KAWASAKI, YAMAHA and others;

3. Support E-Car key programming function for LI, NETA, LEAPMOTOR, SERES, AITO and others;

4. Support unlock ECU function for ALFAROMEO, FIAT, CHRYSLER, DODGE, JEEP and others;

5. Support programming solutions for SMART 453 that have lost all keys and all functions have been disabled;

6. Support programming solutions that have lost all keys and all functions have been disabled for RENAULT CITY K-ZE, KWID, SANDERO, TRAFIC, TWINGO, LODGY, DUSTER PH3;

7. Support pincode reading function that have lost all keys (No risk, and will not turn your car into a brick) for Renault post-2015 ESPACE, KADJAR, KOLEOS, MEGAN, SCENIC, TALISMAN and Samsung QM6\SM6 models.

8. Paid software activation service for Cluster Calibration, ECU Flasher, Airbag Reset, Test Platform and the other functions are available.

(Please contact our sales representatives or distributors for more details.)

To discover more supported functions, please contact our sales team.

Function Display

1) Main Page

2) IMMO

3) Remote Test

4) RFID

5) ECU Advanced

6) ECU Flasher

Highlights:

1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily. 
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Ben Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Add Vehicle Engine Data Calculation and Processing (MED17, EDC17 etc)
4. Support Checksum Function
5. Newest Software Version: V1.0.9, Hardware Version: V1.1.5

Xhorse Multi-Prog Free Software Download

Xhorse Multi-Prog Functions:

1. Read, Write and Clone ECU
BMW B48/B58 reading ISN 
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
VW BOSCH MED17 Series ECU 
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
With Free MQB48 License. Bind Multi-prog and VVDI2 full version to the same Xhorse app account to use MQB48 NEC35XX function
Also Compatiable with Xhorse MQB Solder-free Adapters

2. Read, Write and Clone TCU
Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU

3. Vehicle Engine Data Calculation and Processing
MEDl 7/EDC17 data processing

4. Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services

5. Read & Write MCU
Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
Support certain encrypted chip reading and writing

6. Read & Write Vehicle Immo Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,
VW MQB dashboard, AUDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules
Note:Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM
Support EEPROM and FLASH

8. Read & Write Vehicle Dashboard
Support dashboard of VW, Honda, Hyundai, Kia, etc.

Xhorse Multi-Prog ECU and TCU List: (Keep Updating)

ECU (Bench Mode):

VAG 
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MG1CA811
3. BOSCH: MED17.1.6, MED17.1.21, MED17.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED1 7.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
4. BOSCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01, EDC17U05
5. BOSCH: MG1CS002一SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777, MG1CS002_TC298TP, MD1 CP004_TC298TP, MD1 CP004一SPC5777, MG1 CS111 一SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
6. CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90 
2. BOSCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP (B38, B48, B58), MD1CS001_TC298TP, MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
3. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
4. BOSCH: MEI 7.2.1
5. BOSCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K 
6. OSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz
1. CONTINENTAL: SIM271 DE, SIM271 KE
2. BOSCH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. BOSCH: CRD3x.x_TC1793, CRD3x.x_TC1 797
5. BOSCH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1CS006_TC298TP

GM
1. DELPHI: DCM3.7AP
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Nissan
1. DENSO: 23740-3Nxxx_Gen1 SH72531
2. BOSCH:EDC17C84

Hyundai/Kia
1. BOSCH: ME17.9.11, MEI 7.9.11.1
2. BOSCH:EDC17C53
3. BOSCH: MEG17.9.1 2_ECU

Ford
1. BOSCH: EDC17C70, EDC17CP65
2. BOSCH: ME17.0.3, ME17.8.5

Volvo
BOSCH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22

Other
1. AM_ME1 7.8.5,DOO_ME17.8.5
2. BOSCH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767, ME1 7.8.31, ME1 7.9.52
3. BOSCH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14, EDC17c81
4. BOSCH: MEVD1 7.8.4
5. BOSCH: MED17.8.1 0_TC1 728, MED17.8.1 0_TC1 728_Hw2, MED1 7.8.1 0_TC1 767
6. BOSCH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1CS163, MD1CS01 2, MD1CS089, MD1CS069, MD1CS005_TC298TP, MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP, MG1CS01 7_TC277TP, MG1CS01 8, MG1CS019, MG1CS088
7. CONTINENTAL: SID208, SID209, SID211, SID807EVO ⑧ DENSO: KH, ZY, SH70xx_275xxx-xxx

ECU (Boot Mode):

VW series
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MED17.1.6, MED17.1.21, MED1 7.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED17.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
3. BOSCH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01, EDC17U05
4. BOSCH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW series
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
3. BOSCH: ME1 7.2.1
4. BOSCH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G(N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
5. BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz series
1. CONTINENTAL: SIM271 DE,SIM271 KE
2. BOSCH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. DELPHI: CRD2.x_MPC556x

Nissan series
BOSCH: EDC17C84

GM series
1. DELPHI: MT80.MT80.1
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Hyundai/Kia series
1. DELPHI: MT86
2. DELCO: DCM6.2AP

Other
1. CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
2. SDI21.1 ,SDI21.2,SDI21.3
3. BOSCH: ME1 7.3.0
4. MARELLI: 8DF, MM10JA

TCU (Bench Mode):

VW
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx, DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250

Exx/Fxx BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2

Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT

Ford series
1. ETRAG MPS6GETRAG
2. DPS6, DC4

TCU (Boot Mode)

Ford series
DPS6, DC4

Other
ZF 9HP

Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
43pcs x ECU Cable Plugs
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity 

OBDSTAR FCA 12+8 Cable for Chrysler Work on X300 DP Plus/X300 PRO4/OdoMaster/X200 PRO2

All FCA (FIAT/CHRYSLER/ALFA ROMEO) vehicles after 2018 are equipped with SGW security gateway module to prevent attacks on the vehicle network via the CAN bus. Directly plug in the OBD II-16 connector cannot communicate with the vehicles because SGW security gateway module can block the access to the vehicle's OBD2 port from non-original diagnoses. To solve this problem, you can connect to the 12PIN and 8PIN connections on the car via this FCA 12 + 8  cable to get normal communication with the car.

Product Function:

Vehicle Coverage:
 

Autel MaxiIM IM608 II is the newest all-in-one OBD diagnostic tool this year, combining full IMMO and programming function coverage, all system diagnostics, 36+ maintenance functions, ECU coding and ECU online programming (J2534 JVCI compatible) and more. It functions exactly the same as Autel MK908P II or MaxiSYS MS908S Pro II. 

Main Configuration Updates Based on Autel IM608 Pro:

• Operating system move on to Android 10 from Android 4.4.
• Upgraded 8-core Qualcomm SDM660 8-Core Processor replacing old Exynos T5260 6-Core Processor.
• Doubled RAM & ROM: 4GB/128GB; SD card support up to 64GB (IM608 Pro support max 32GB)
• 16MP Rear camera replacing the previous 8MP one.
• Optimazed newest Software version & More Intuitive Interface.

Autel MaxiIM IM608 II Features

• No IP Limitation: You Can Use it All Around the World without Limitation
• One Year Free Update Online (After One Year, IM608 II Software Subscription Cost $850/Year)
• Upgraded Version of Autel IM608 and IM608 PRO, with the latest powerful hardware configuration
• Smart Mode and Expert Mode Solution In One Tool to Easy Operation with Ambient Light Sensor – detects ambient brightness.
• Support Multi-Language: Both Diagnose Software and IMMO Software Support Multi-Language. (Default Language is English, Can Be Changed Language to German, Swidish, Italian, Portuguese, French, etc.)
• Works for 85% Cars In The Wordwide, Include BMW, BENZ, VW, AUDI etc. make your work simple and easier, Best Choice for Locksmith and Workshop
• Extended to Work with Autel MV108/ MV105 allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure safely and quickly.

Autel MaxiIM IM608 II Top Highlights

Upgraded from IM608/IM608PRO, the IMMO & key fob programming tool IM608 II can also read the immobilizer pin codes and password directly from the vehicle and store the information to do key learning for the newly programmed keys. The professional key fob programming tool Autel IM608 II has covered almost all the key programming functions:

• Auto Detect Make/Model/Year/System
• Read PIN (All Key Lost), Key Learning
• IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding
• VW MQB Key Learning, Mercedes Key Learning
• B~MW FEM/BDC Key Learning and Adaption, Programming and Coding functions for lMMO related systems: DME,JBE,FRM,CAS, KOMBI,EGS, GwS,ZGW, ELV and FZD
• B~MW CAS4 Key Learning and Adaption
• Mercedes-Benz: Coding SCN for lMMO related systems;DAS, ECU, TCU, ISM and ESL
• 2015-2018 Land Rover & Jaguar write key via dump
• Volvo Smart Key Learning/knob-style smart key

Expanded adapter set for the IM608 II with the XP400PRO:

• Supports over 10 key unlock types
• BMW EWS3 key learning
• Benz NEC key learning
• Benz ESL_W209 read/write/erase

Autel - MaxiIM IMKPA

This Expanded adapter set for the IM608/IM508 with the XP400PRO Autel key programmers

• Supports over 10 key unlock types
  
• BMW EWS3 key learning
  
• Benz NEC key learning
  
• Benz ESL_W209 read/write/erase
  
• Compatible with IM508 and IM608 Autel key programmers (XP400Pro required)

Autel - APB 112

• Autel APB112 Smart Key Emulator
• Supports 46, 4D Data Collection
• Supports 46 Smart Key Password Calculation
• Supports 46 Chip Emulation
• Supports Toyota4D (94/D4, 98) Smart Key Emulation
• Supports Toyota H (88/A8, A9, 30) Smart Key Emulation

Autel - G-BOX2

• Autel G-BOX2 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

It supports the following functions:

• OBD function for VW, Audi, Skoda, Porsche, BMW , Seat, Bentley
• Supports BMW CAS1, CAS2, CAS3 by OBD and CAS4 by Eeprom
• AUDI Generation 5, BMW OBD Function and BMW CAS4+ Functions
• Transponder chip programming - Read/Write/Copy/Verify
• Immobilizer Data Tool and Remote Programming
• Support of third-party software (ODIS, VAS5054, Techstream, HDS)
• Auto detect transponder and Remote frequency test
• Online firmware and software update (Free Lifetime Updates)
• 8 month Xhorse warranty

Includes

• VVDI2 Base Unit
• OBD2 Cable with K-Line Connector
• USB Data Cable
• 5th BDM Programming Cable
• Remote Programming Cable

Includes the Following Software:

NOTE: We suggest you create a folder on your desktop, exclude it in Windows Defender and put the files inside it. This way windows defender does not delete anything. You will have to extract the files and run them from there. The software is portable and doesn’t install on the PC.

Highlights:

1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

• DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
• Ignition simulated start switch.
• Immobilizer dashboard simulated indicator.
• Key sensing area.
• Screw bolt.
• Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
• Godiag OEM dedicated CAS4 CAS4+ start control adapter. 

Key Features

• Master version: Unlike the Salve version in other tools, with Hexprog II users can read/write files without restrictions.
• Supports one of the largest Ecu/Tcu list in Cars, Trucks, Bikes and Boats for Ecu cloning and Chip Tuning, check Hexprog II Ecu List
• Supports both old and latest Ecus/Tcus from Bosch, Continental, Delphi, Marelli, Denso, Temic, TRW and Valeo... etc.
• Reads BMW long ISN from BMW DME and DDE including MD1 and MG1 in F/G series.
• Supports online services like IMMO OFF, DPF OFF, EGR OFF, AdBlue,,,, etc.
• A dedicated support team with ticketing system ensures that technical issues are quickly resolved.
• Three Years Hardware Warranty.

Hexprog II Information

To know more about Hexprog II, please see below links:

• Hexprog II Supported Ecus and Tcus List
• Hexprog II User Manual
• Hexprog II Tuner Software Download

Introducing the Hexprog II Ecu programming tool, the pinnacle of ECU cloning and chip tuning advancements. Through meticulous observation of the strengths and weaknesses of previous generations, we have created a solution that attends to every detail.

Our extensive experience has been harnessed to develop a lightning-fast, dependable, and user-friendly software. The outcome is nothing short of remarkable an extraordinary tool that seamlessly caters to the needs of its users.

On Bench Chip Tuning/Ecu Cloning

Our advanced system offers you the ability to effortlessly read and write various memory types, including P-Flash, D-Flash, External Flash, and external EEPROM. What sets our solution apart is the convenient option of automatic checksum correction.

When it comes to accessing Ecus, you'll have two highly effective methods at your disposal:

• Bench Mode: Experience the convenience of this option, which eliminates the need to open the Ecu cover. By simply plugging in the required power and signal wires, you can quickly and easily begin working with the Ecu.
• Boot mode: In situations where the Ecu is unresponsive, our boot mode comes to the rescue. To utilize this method, opening the Ecu and connecting the boot wire to the Ecu board is necessary. This approach proves invaluable when troubleshooting and resolving issues with non-responsive Ecus.

OBD Chip tuning/ Ecu Repair

Hexprog II, developed by Microtronik, is a cutting-edge programming tool that offers an array of advanced features and capabilities. With Hexprog II, you can effortlessly read and write the map area of various Ecus, and it even supports virtual read functionality, providing an added layer of convenience.

But that's not all - Hexprog II goes beyond basic programming tasks. It incorporates essential functions, including VIN Changing, Coding backup/restore, and Fault codes read/erase. This comprehensive suite of features ensures that you have everything you need to efficiently work with Ecus and perform critical operations.

Leveraging Microtronik's extensive experience in car Ecu flashing and coding, Hexprog II stands as a testament to their expertise. Drawing upon this wealth of knowledge, Microtronik has meticulously crafted Hexprog II to be one of the most safe Ecu programming tools available through OBD. Hexprog II combines cutting-edge technology with the utmost attention to security, providing you with a reliable and secure programming solution for your Ecu needs.

BMW ISN reading

Hexprog II incorporates a crucial feature derived from Autohex II: ISN management. Building upon the success of its predecessor, Hexprog II embraces this essential functionality, elevating its capabilities to new heights.

One of the standout features of Hexprog II is its ability to read the complete long ISN (Individual Serial Number) from any BMW Ecu. This includes even the most recent Bosch MG1/MD1 Ecus, spanning from 2005 to the present day DME/DDE models. With Hexprog II, you can confidently access and retrieve the ISN information you need from a wide range of BMW Ecus, providing you with comprehensive control and compatibility.

By integrating this advanced ISN management functionality into Hexprog II, we empower you with the tools necessary to tackle the latest BMW Ecus, ensuring compatibility and accuracy in your operations. Hexprog II is your go-to solution for ISN management, designed to meet the demands of modern BMW vehicles and provide you with a seamless and efficient experience.

Compare to Hexprog

Hexprog II stands as a specialized tool that caters to both Ecu repair and chip tuning needs. This dedicated solution is specifically designed to excel in these areas, providing unparalleled functionality and performance.

On the other hand, Hexprog is a versatile multi-function tool, you gain the ability to read and write Immo modules, including CAS and BCM. It also offers support for Keys Reset and EEProms reset, adding to its comprehensive range of capabilities.

Hexprog II supports all types of protocols/connetion methods of any Ecu/Tcu, but it does not support other functions available in Hexprog.

However, it's important to note that Hexprog has certain limitations. While it covers a wide range of functionalities, it does not support all types of Ecus/Tcus connections, such as DAP, NBD, and certain JTAG variants.

To better understand the differences between Hexprog and Hexprog II, refer to the table below for an overview of their key distinctions:

The OBS-TOY-30-V2 is a specialized cable designed for advanced key programming operations on Toyota vehicles. It supports all-key-lost scenarios and password-free programming for 4A and 8A-BA smart key types using the X300 DP PLUS, X300 PRO4, or X300 DP Key Master devices.

This kit contains a set of two cables. A Toyota-30 V2 cable and a CAN Direct cable.