Categories
AUTEL (20) CGDI (21) LISHI (62) OBDSTAR (14) XHORSE (30) MICROTRONIK (3)

Filters

Filters

Clear all
$
to
$
21 products
Sort by
Sort by
FC200 ECU Programmer FC200 ECU Programmer
Add to wishlist
Add to compare
FC200 ECU Programmer
$759.21

CG FC200 ECU Programmer Full Version

 

FC200 Highlights:

  • Protect Original Car Parts
    More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.  
  • Intelligent Recognition
    The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.
  • Module Clone
    Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.
  • ISN Read and Write
    Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.
    Check FC200 BMW ISN Read and Write List
  • VIN modification
    Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.
  • Data Processing
    Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;
    Support the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;
    Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.
  • FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.
    Check FC200 Support ECU List
  • For Checksum Function, Please Check FC200 Support Checksum List for Reference.
  • There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode
  • Multi-Language: English, French and Simplified Chinese
    For Spanish, Polish Turkish and Traditional Chinese, will need to pay $130 to get authorized seperately with serial number.
  • Full Version with All License Activated. 
    Free Update Online for One Year. Annual Fee will be $250/year after the first year.
  • With New Adapters Set No Need Disassembly in Package:
    Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.
    (With this adapter set, you won't need the old B48/B58 cable anymore).

 

FC200 Latest Update Information:

 

V1.0.7.0  Registered Version NEW (2022.06.28)

  • Added Bosch ST10 series engine boot modes: M7.9.7, ME7.9.71, ME7.9.7, ME7.4.5, ME7.9.9, MED7.6.1, MSE3
  • Added Hyundai and Kia KEFICO series engine boot modes: CPEGD2.20.1, CPEGD2.20.2, CPEGD2.20.3, CPEGD2.20.4
  • Added Delphi engine boot mode: CRD2.x MPC5566
  • New Bosch boot mode engines: ME17.9.23, MED17.7.5, ME17.9.7, M17.8.7, MED17.8.2, EDC17CP65, ME17.8.5
  • Newly added engines to modify the VIN function: EDC17C63, EDC17CV44, MED17.1.1, MED17.8.2, MEDG17.0
  • Modify the VIN function and add the function of forcing a new VIN to be written
  • Fix some bugs and optimize software performance

 

Functions of Each Adapter:

  • MSV90 Adapter:
    This adapter supports ISN reading and writing and data backup and recovery of BMW MSV90
  • N20 Adapter:
    This adapter supports ISN reading and writing, VIN modification and data reading and writing functions of the N20 and N13 of the F series chassis of BMW
  • B48/B58 Adapter:
    This adapter supports ISN reading and data reading and writing functions of BMW models: MG1CS003, MG1CS024 and MG1CS201
  • 271KE Adapter & 271DE Adapter:
    These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE
  • 6HP & 8HP Adapter:
    The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.

 

Package List:

  • CG-FC200 Host
  • DB15 Adapter
  • Multifunctional Wiring Harness
  • OBD Adapter
  • USB Wiring Harness
  • FC200 Adapter Set
    including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 1 / 1
CGDI FEM CGDI FEM
Add to wishlist
Add to compare
CGDI FEM
$59.00

GODIAG BMW FEM/BDC Test Platform

 

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 7 / 7
CGDI CAS 4 CGDI CAS 4
Add to wishlist
Add to compare
CGDI CAS 4
$69.00

Highlights:

  1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
  2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
  3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
  4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
  5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
  6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
  7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

 

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

  • DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
  • Ignition simulated start switch.
  • Immobilizer dashboard simulated indicator.
  • Key sensing area.
  • Screw bolt.
  • Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
  • Godiag OEM dedicated CAS4 CAS4+ start control adapter. 
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 11 / 11
Oem BMW FEM-BDC Chip Anti-theft Data Reading Adapter Oem BMW FEM-BDC Chip Anti-theft Data Reading Adapter
Add to wishlist
Add to compare
Oem BMW FEM-BDC Chip Anti-theft Data Reading Adapter
$25.00

OEM BMW FEM-BDC 95128/95256 Chip Anti-theft Data Reading Adapter 8Pin Adapter Work with VVDI Prog/CG Pro 9S12/Orange5

BMW FEM-BDC can read and write anti-theft data, and it is safe and stable without losing data.

Features:

Read and Write Anti-theft Data
Convenient and Safe
Stable without losing Data
Anti-theft 95128/95256 Meter 35080/35160

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 11 / 11
CGDI MB Benz Key Programmer FULL CGDI MB Benz Key Programmer FULL
Add to wishlist
Add to compare
CGDI MB Benz Key Programmer FULL
$799.00

CGDI MB Key Programmer Highlights:

  • Supports fastest Benz Car key add: collection time 1'50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.
  • Work with both BE key and original key
  • With new Diode equipped, which makes infrared more sensitive to keyless go key. No need to replace diode chip yourself anymore.

All Key Lost Support List: :

  • W164, W216 (2009-)
  • W164, W216 (2009-)(Fast)
  • W164 (Old), W221 (-2009)
  • W164 (Old), W221 (-2009)(Fast)
  • W166, W197, W212(Old), W212, W246
  • W169
  • W169 (Fast)
  • W172, W204, W207, W209, W211
  • W172, W207, W209, W211(Fast)
  • W202, W203, W208, W210, W463, W639 (K)
  • W202, W203, W208, W210, W463, W639 (K)(Fast)
  • W215 W220
  • W230
  • W639 (CAN 2009-)
  • W639 (CAN 2009-)(Fast)
  • W906
  • List keeps updating

Support more old Mercedes cars key programming by OBD compared to other Mercedes key programmer like VVDI MB BGA, such as:

  • W210, W203, W639, W220,W215, W169
  • Mercedes E Series W210 before year 2004
  • Mercedes C Series W203 before year 2005
  • Mercedes V Series V639 before year 2008
  • Mercedes A Series W169 before year 2009
  • Mercedes B Series W169 before year 2009
  • Mercedes S Series W220 before year 2005
  • Mercedes E Series W211 before year 2008

CGDI MB support ECU renew on these models at present:
ME9.7, MED17, CR3.xx, CR4.xx, CR5, CR60.xx, CRD.11, CRD2.xx, , SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LE, SIMELKE
Support Gearbox Renew on EGS 7G

Mileage Repair and Gateway Read/Write Authorization Free (Since March, 2019) and FBS4 Mileage Repair.
Mileage Repair Support Mercedes List:
C(W204) / GLK(X204) / CLK(207) /E(W212) /SLS(197) /CLS(W218) / R-Class(W251) /GL(X164) / ML(W164) / E-Class(W211) / CLS(W219) S-Class(W211) / CL(216) C-Class(W203/ CLK(W209) / SLK(R171), Keep Updating.

Function List:
EIS Function - 

  • Support OBD mode and infrared mode to automatically recognize EIS and read data. (FBS3/FBS4)
  • Support the identification of SSID and EIS number. (FBS3/FBS4)
  • Support to read/modify VIN. (FBS3 and FBS4 only support reading)
  • Support reading kilometers. (FBS3/FBS4)5.Support reading KEY track code. (FBS3)
  • Support the detection of KEY usage and enabling status. (FBS3/FBS4)
  • Support to read the last used KEY position. (FBS3/FBS4)
  • Support reading the penultimate use KEY position. (FBS3/FBS4)
  • Support detecting EIS status. (FBS3/FBS4)
  • Support erasing EIS. (Online online, FBS3)11.Support writing EIS data. (FBS3)
  • Support the protection of clearing TP. (FBS3)
  • Support disabling EIS. (FBS3/FBS4)
  • Support for enabling EIS. (FBS3)
  • Support activating EIS. (FBS3)
  • Support infrared mode to directly read the KEY password of W215 and a few W209/W211 EIS. (FBS3)
  • Support EIS type:
    • W164, W251 -2009
    • W164, W251 2009-
    • W166, W197, W212, W218, W246
    • W169, W209, W211
    • W172, W204, W207, W212(ELV)
    • W202, W208, W210(K)
    • W203, W463, W639(K)
    • W215, W220(K)
    • W216
    • W221
    • W230(K)
    • W639 2009-(CAN)
    • W906

Key Read And Write Function:

  • Support infrared mode to directly read KEY basic information, including SSID, available times, used times, KEY location, KEY status, KEY version.
  • Support BE KEY infrared mode to directly read KEY password, erase, write new KEY data and activate.
  • Support KEY write data with 21DF status.
  • Support reading/activating the new BGA KEY.
  • Support KEY hopping code repair.
  • Support smart KEY (08/09) and non-smart KEY (40/51/57).
  • Only support reset KEY chip type:
    00043650 chip
    00040582 chip
  • Types of KEY chips that support reading, writing and resetting:
    00040229 chip
    567897041 chip
    567897051 chip
    567897061 chip
    567897071 chip
    567897081 chip
  • Support CGMB KEY frequency switching, 433Mhz/315Mhz, resistance control arbitrary switching.

Password Calculation Function (Online):

  • Support for having car keys and keyless (all lost) calculation passwords, of which all lost support normal collection and fast collection.
  • To calculate the password, you first need to collect data, which takes about 3 minutes with the car key.
  • In 99% of cases, the password is calculated at one time, and the time is about one minute.
  • If there is a car key, calculate the EIS type supported by the password:
    • Mercedes-Benz A series after 2004
    • Mercedes-Benz B series after 2005
    • Mercedes-Benz C series after 2001 (including W210)
    • Mercedes-Benz E series after 2001 (including W203)
    • Mercedes-Benz CL series after 2001
    • Mercedes-Benz GLK series after 2004
    • Mercedes-Benz ML series after 2003
    • Mercedes-Benz R series after 2003
    • Mercedes-Benz G series after 2003
    • Mercedes-Benz S series after 2001 (including 220)
    • Mercedes-Benz SLK series after 2003
    • Mercedes-Benz SLS series after 2004
    • Mercedes-Benz Vito series after 2003
    • Mercedes-Benz Sprinter series after 2003
  • If there is no car key, calculate the EIS type supported by the password:
    • W164, W216(2009-)
    • W164, W221(-2009)
    • W166, W197, W212(old), W212, W246
    • W169
    • W172, W204, W207, W209, W211
    • W202, W203, W208, W210, W463, W639(K)
    • W215, W220
    • W230
    • W639(CAN)
    • W906
  • In the absence of a car key, some EIS support quick collection, the types are as follows:
    • W164, W251 2009-
    • W164, W251 -2009
    • W169
    • W172, W207, W209, W211
    • W202, W203, W208, W210, W463, W639(K)
    • W216
    • W221
    • W639 2009-(CAN)

Generate Key Data Function (Online):

  • Load EIS data to generate KEY data.
  • The time to generate KEY data is about 10 seconds.
  • Support generating KEY data of HC05/908/912/9S12/NEC type EIS.

ECU/TCU/ISM Programming Function:
ECU: Automobile electronic control unit, also known as trip computer.
TCU: Automobile gearbox computer.
ISM: Car gear computer, also known as DSM and ESM.

  • Support reading data of ECU/TCU/ISM.
  • Support the erasing of ECU/TCU/ISM. (online)
  • Support ECU/TCU/ISM data loading and saving.

ELV Function:
ELV: Car steering lock, also known as ESL.

  • Support OBD mode to read ELV data directly. (Clamp on the ELV K line with a small yellow clip)
  • Support to erase ELV. (Online)
  • Support direct write direction lock data. (Online)
  • Support for synchronizing ELV data.
  • Support checking ELV damage.
  • Support for activating ELV.
  • Support to repair ELV.
  • Support ELV type:
    W209, W211
    W204, W207, W212
    W169
    W639(NEC)
    W906
  • Support W204/W207/W212 ELV simulator function

Car Mileage Repair Function:

  • Support to read the internal data of the instrument, including serial number and mileage.
  • Support for writing mileage information.
  • Support to clear the fault code of the instrument.
  • Support EEPROM reading and writing of the instrument.
  • The supported instrument types are as follows:
  • C-CLASS/CLK-CLASS: W203, W204, W205 (2014-2017), W209
  • CLS-CLASS: W218, W219
  • E-CLASS: W207, W211, W212
  • GL-CLASS: X164
  • GLK-CLASS: X204
  • M-CLASS: W164
  • R-CLASS: W251
  • S-CLASS/CL-CLASS: W221, W222 (2013-2016)
  • SL-CLASS/SLK-CLASS: R171
  • SLS-CLASS: W197
  • VITO/VIANO: W447(2014-2017)

ZGW Data Read And Write Function:
ZGW: Automotive Gateway

  • Support ZGW's EEPROM/FLASH read and write.
  • The types of ZGW supported are as follows:
  • C-CLASS: W204
  • E-CLASS: W211, W212
  • M-CLASS: W164
  • R-CLASS: W251
  • S-CLASS: W221
  • CLK-CLASS: X204, W207
  • CLS-CLASS: W218
  • SLK-CLASS: R171
  • GL-CLASS: X164
  • CL-CLASS: W216
  • SLS-CLASS: W197

Functions of the Adapters:

EIS/ELV Test Line for Mercedes (without Having to Get on the Car)

Mercedes Locks Platform Test Line for W204 W212 W221 W164 W166 W205 W222

Scope of Applicationa:

The EIS ELV maintenance
Key programmer
Detection key

ELV Repair Adapter for CGDI MB Benz Key Programmer:

  • Automatically forced clearing contents
  • Enable ELV,Get out of suspended anim ation
  • Virgin,Solve accidental errors
  • Test Write ELV,Determine if it is working properly
  • W204 W207 W212 W209 W906 Reparing locked chip


CGDI ELV Simulator Renew ESL for Benz 204 207 212 with CGDI MB Benz Key Programmer:

CGDI MB ELV Emulator is newly released adapter by CGDI Company, which can Renew ESL for Benz 204 207 212, work with CGDI MB Benz key programmer, can do the same function with Xhorse ELV Emulator with cheaper price.

Most W204 W207 W212 ESL will damage with EIS. In this case, there are two possible reasons and solution:
ESL motor is damaged and need to replace a new motor
NEC chip is locked, theoretically it can be unlock, actually it needs to replace new ESL.

CGDI MB AC Adapter Features:
Acquire data via OBD at a quick speed
No need to dismantle EIS
No need to plug and insert the cable
Save much data acquisition time

CGDI MB AC Adapter Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

  • Language: English, Spanish, French, German and Chinese
  •  

CGDI MB Prog Package List:
1pc x CGDI MB Multiplexer
1x AC Adapter
1x EIS Test Line
1x ELV Adapter
1x ELV Simulator

Key programming machines cannot be returned after they have been registered
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 0 / 0
CGDI BMW Key Programmer Full Version CGDI BMW Key Programmer Full Version
Add to wishlist
Add to compare
CGDI BMW Key Programmer Full Version
$899.00

CGDI BMW Key Programmer Full Version Highlights of CGDI BMW Full Version:

  1. High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 2.
  2. Support All 24 Authorizations Free: CAS1-3+ Key Match, CAS4 Key Match, Normal Mode Read ISN, Bootstrapper upgrades, FEM/BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable/Disable Key, BMW F Series Coding, EGS Empty and Clone, CAS Mileage Reset, Porsche 987/911 key learning, 95128/95256 Read and Write, BMW E Series Program, BMW E Series Codification, Maserati Meter Mileage Adjustment, BMW EWS Key Match, BMW Data modification and verification, BMW Diagnosis, ICOM Function, B48 B58 read ISN, CAS4 Key Match(OBD), MSD80/81/85/87/ MSV80 /MSV90 read ISN and N13 / N20 / N55 /B38 Read/Write ISN.
  3. Free Update Online, when you receive the device, please download software Here
  4. Lifetime Free License, device won't get expired, just renew license online for free when there is no day left.
  5. Multi-Languages: English, Spanish, French and Chinese If you need Italian, Polish or Turkish, please pay $130 to activate.
  6. With Free Reading 8 Foot Chip Free Clip Adapter and BMW OBD Cable in package
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 0 / 0
Godiag GT110 For VW UDS 4TH GENERATION Godiag GT110 For VW UDS 4TH GENERATION
Add to wishlist
Add to compare
Godiag GT110 For VW UDS 4TH GENERATION
$78.00
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 8 / 8
GODIAG GD101 J2534 Diagnostic Cable GODIAG GD101 J2534 Diagnostic Cable
Add to wishlist
Add to compare
GODIAG GD101 J2534 Diagnostic Cable
$29.00

GODIAG GD101 J2534 Highlights:

1. Support J2534 and ELM327 mode in one device. Switch mode automatically.

2. Compatible with Honda HDS 3.104.024, Toyota Techstream V17.30.011, JLR SDD V163, Forscan 2.3.48, scanmaster v2.1, pcm-flash 1.2.0, VAG ODIS 9.1.0 and Renault Clip V227.

3. GODIAG GD101 J2534 has the similar functionality as Tactrix Openport 2.0.

4. More speedup. Faster communication and reprogramming.

5. More stability. Never let you down while reprogramming.

6. Portable and convenient. Small package and easy to carry.

7. Wok on Windows 8/10/11, 32/64bit

8. Multi-Languages Available:

ODIS: English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech ,
Russia, Greece, Chinese

Toyota: English, French, Spanish, Japanese, German, Italian, Russian, Turkish, Chinese

Honda: English, German, Czech, Dutch, Finnish, French, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Slovenian, Spanish, Swedish, Turkish, Japanese ,Chinese

JLR SDD: German, English, Spanish, French, Italian, Dutch, Portuguese, Russian, Japanese, Chinese, Korean

Forscan: English, Russian, Polish, Italian, German, Hungarian, Turkish, French, Latvian, Bosnian, Finnish, Romanian, Portuguese, Traditional Chinese, Simplified Chinese, Czech, Lithuanian, Slovak , Ukrainian

Scanmaster elm 327: English, Czech, German, Spanish, French, Hungarian, Italian, Polish, Serbian, Turkish, Danish, Croatian

Pcmflash: English, Russian

Can Clip Renault: English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish

GODIAG GD101 J2534 OBD2 Openport 2.0 Features:

1. Support most all of J2534 compatible software (HDS, TIS, ODIS, JLR SDD, PCMFLash...). 

2. Support most all of ELM327 software (ELMConfig, Forscan, ScanMaster...).

3. Support ECU reprogramming in J2534 mode with programming voltage.

4. Supply free software for diagnosing J1979 compatible vehicles.

Notice:

1. Software Free Download:
Free Download Godiag J2534 Driver V2.3
Free Download ODIS V10.0 (Password: 6vi5ku)
Free Download JLR SDD V164
Free Download Can Clip Renault V227


For Honda HDS 3.104.024, Techsteam V17.30.011, JLR SDD V163, Forscan 2.3.48, Scanmaster v2.1, PCM-flash 1.2.0 and VAG ODIS 9.1.0, please contact online customer service on Whatsapp: +86 15827245313.

 

2. For PCMFlash 1.20, will need to buy a PCMtuner Dongle. And only supports the OBD part. It does not support bench, boot, vag, dsg and gearboxes.

 

3. Not Support Win7 System

 

GODIAG GD101 J2534 Supported Car Models:

1.JLR SDD Software for Land Rover/Jaguar
Support for L316, L319, L320, L322, L359, L538 Land Rover vehicle lines.
Support for X100, X150, X202, X250, X350, X351, X400 Jaguar vehicle lines.

2. HDS Software for Honda
Support for Accord, Civic, Crv, City, et al.

3. Toyota
Support for Camry, Rav4, Carolina, Prius, Lexus

4. ODIS VAG
Support for Vw, Audi, Seat, Skoda

5. GM GDS2 Software
Support for Buick, Chevrolet, Cadillac, etc.

 

GODIAG GD101 J2534 Function List:

Software Brand Year NOTE
Toyota TIS Techstream Toyota, Lexus 1995-2022 Free download and activate software, update by link
Honda HDS 3.102 Honda Acura 1995-2022 Does not support non-#7 K-line, update by link
ODIS-S, ODIS -E VW Audi Skoda Seat 1995-2022 For J2534 VAG only. Don't support CAN FD protocol, Don’t support Ignition switch voltage detection
Forscan 2.3.48 Ford Mazda Lincoln 1996-2022 Cannot do 3, 11 medium speed CAN
Scanmaster V2.0   1996-2022 Free download and activate software
PCMFlash V1.2.0 67 modules 1996-2022 Yes, test by your side
J1979Tester   1996-2022 Free Honda immo code calculation
ELMConfig   1996-2022 Yes, test by your side
JLR SDD2 Jaguar Land rover 2006-2016 Support for L316, L319, L320, L322, L359, L538 Land Rover vehicle lines.
Support for X100, X150, X202, X250, X350, X351, X400 Jaguar vehicle lines.
GDS2 GM Buick Cadilac Chevlert 1995-2022 Yes
Renault Clip V227 Renault 2005+ Renault with Can Bus Protocol Free download by link

 

Notice : Can't support MS-CAN

GODIAG GD101 J2534 Protocol Configuration:

1. ISO15765 (Standard/Extended frame).
2. ISO9141.
3. ISO14230.
4. J1850 PWM (Support IFR and 2X speed mode).
5. J1850 VPW (Support 4X speed mode).
6. Programming voltage.
7. Short to ground.
8. ELM327 with command set version 1.3a
 
GODIAG GD101 J2534 Hardware Configuration:
1. ISO11898-2 high speed CAN (OBDII PIN 6 and PIN 14. Speed up to 1000Kbps).
2. ISO9141 and ISO14230 K line (OBDII PIN 7 and PIN 15).
3. J1850 PWM (OBDII PIN 2 and PIN 10).
4. J1850 VPW (OBDII PIN 2).
5. Programming voltage (OBDII PIN 12 or PIN 13. Programming voltage up to 20V).
6. Short to ground (OBDII PIN 9. Short to OBDII PIN5).
7. Dimension(L*W*H): 95mm*55mm*23mm
8. Environmental:-20℃-45℃(-4℉-113℉)
9. Vehicle voltage requirements: 8-18V DC
10. Vehicle connection: Molded DLC3(OBDII-16)
11. Host connection: USB 2.0

 Fixed the following bugs:

1. J2534 mode J1850 VPW TX message size extended to 4128 bytes

2. ELM327 mode can not be connected by PyOBD

3. ELM327 mode can not read ISO9141 VIN

 
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 2 / 2
BMW ISN DME Cable BMW ISN DME Cable
Add to wishlist
Add to compare
BMW ISN DME Cable
$32.99

The BMW ISN reading cable is required to read the BMW ISN number on the bench without the car BMW ISN code is required when programming BMW CAS3+ all keys lost the smart key

Connect the BMW DME ISN reading cable with the BMW ECU and the BMW key programming device, and start BMW ISN reading procedures from BMW DME, BMW ISN reading is done without drilling a hole in DME for the BMW DME boot bin.

 

How to read BMW MSV80 ISN using the VVDI2 BMW key programmer

  • Connect BMW DME with the VVDI2 using the BMW ISN reading cable
  • Go to the key learn section in the VVDI2, then select ECU ISN reading
  • Select the BMW DME Type you need to read the ISN
  • Press Read BMW ECU information
  • The VVDI 2 will show you the BMW ECU info
  • Press Read BMW DME ISN
  • BMW ISN code reading required approximately 8 minutes
  • After BMW ISN reading success the VVDI2 will show the DME ISN code
  • Save the BMW ISN code to process with the BMW smart key programming

BMW ISN cable-supported DME (ECU)

  • BMW MSV80 ISN reading
  • BMW MSV801 ISN reading
  • BMW MSD80 ISN reading
  • BMW MSD81 ISN reading
  • BMW MSD802 ISN reading
  • BMW MSD812 ISN reading
  • BMW MSD851 ISN reading

BMW DME ISN reading cable is compatible with

  • Xhorse VVDI 2 programmer
  • Xhorse VVDI BMW programmer
  • BMW AutoHex III programmer
  • CGDI BMW key programmer
  • and other BMW DME ISN reading devices

BMW CAS ISN reading supported system:

  • BMW CAS3 ISN reading from DME
  • BMW CAS3+ ISN reading from DME
  • BMW CAS3++ ISN reading from DME
  • BMW CAS3+ ISTAP ISN reading from DME

BMW ISN reading cable-supported vehicles:

  • BMW E series DME ISN reading 2006-2014
  • BMW E90 DME ISN reading 2006-2014
  • BMW E92 DME ISN reading 2006-2014
  • BMW E60 DME ISN reading 2006-2014
  • BMW E87 DME ISN reading 2006-2014
  • BMW E89 DME ISN reading 2006-2014

Works with XHORSE VVDI2 or CGDI BMW, read out BMW ISN on bench
Connect the Cable with ECU and device. Don't need drill hole for boot pin.

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 3 / 3
Godiag GT111 For VW 3.5 Generation Godiag GT111 For VW 3.5 Generation
Add to wishlist
Add to compare
Godiag GT111 For VW 3.5 Generation
$65.00
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 9 / 9
Godiag GT110 For VW K-LINE 2&3 GENERATION Godiag GT110 For VW K-LINE 2&3 GENERATION
Add to wishlist
Add to compare
Godiag GT110 For VW K-LINE 2&3 GENERATION
$50.00
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 9 / 9
GODIAG GT107+ GODIAG GT107+
Add to wishlist
Add to compare
GODIAG GT107+
$59.50

Product Description

GODIAG GT107+ DSG Plus Gearbox Data Adapter with inbuild CAN Resistor:

  • GODIAG GT107+ DSG plus gearbox data adapter is a DSG gearbox connection adapter. DSG gearbox maintenance engineers can clone, diagnose and repair DSG gearbox ECU and can also read, write and adjust data for DSG gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.

 

  • This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose "Manual". For other software kessv2, DQ200, DQ250, DQ500, you can also choose "Manual".

 

  • Moreover, with the car battery power, the adapter can directly read and write DSG gearbox data and you can clearly check the communication status during the data reading and writing process.

 

GODIAG GT107+ DSG Plus Features:

1. The adapter is suitable for connecting VAG series gearbox ECUs, supporting gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501, Benz, BMW...

2. Voltage display: the user can know the current operating voltage of the gearbox ECU. If there is a short circuit or wrong wiring, the voltage will drop severely, which can be used to judge the problem.

3. The current display can display the current working current of the gearbox ECU, which is used to judge the working condition of the gearbox ECU.
 
4. The communication indicator can display the current CANbus K-Line communication status.
 
5. Manual and automatic power switch, 120 ohm switch. There are boot mode cable (DB9 DSG gearbox universal conversion jumper) and a probe.
 
6. Detachable gold-plated DB9 connection interface, users can make professional connection ports by themselves to realize DIY development.
 
7. Equipped with power cord that has battery clips. Users can draw power from the vehicle battery.
 
 
GODIAG GT107+ DSG plus Connection Diagram & Operation
 
1.Connect the Godiag GT107+ to the gearbox ECU according to the gearbox ECU wiring definition. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault DC0/DC4, Gen2, for Honda LUK UDCT.
 
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
 
3.GODIAG GT107 + analog ignition switch is in “automatic” mode if the ignition switch is not pressed, the voltage and current data of the adapter displays 0V 0A, and it is in “manual” mode, if the ignition switch is pressed, the adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU. (Note: please select the “automatic” or “manual” analog ignition mode, according to the mode required by the device for reading and writing data.
4.Connect PCMFlash, PCMTuner, J2534passthru.
 
5.Perform data reading and writing operations.
 
 
2. Used on the Car:
 
1.According to the wiring definition of Gearbox ECU, connect Godiag GT107+ to the gearbox ECU. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault DC0/DC4, Gen2, for Honda LUK UDCT.
 
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
 
3.GODIAG GT107 + analog ignition switch is in “automatic” mode if the ignition switch is not pressed, the voltage and current data of the adapter displays 0V 0A, and it is in “manual” mode, if the ignition switch is pressed, the adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU. (Note: please select the “automatic” or “manual” analog ignition mode, according to the mode required by the device for reading and writing data.
 
4.Connect PCMFlash, PCMTuner, J2534passthru.
 
5.Perform data reading and writing operations.
 
 
3. GODIAG GT107+ DSG plus Used with KESS V2, DQ200, DQ250, DQ500:
 
1.Connect the Godiag GT107+ to the gearbox ECU according to the gearbox ECU wiring definition. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault, DC0/DC4, Gen2, for Honda LUK UDCT, Benz, BMW, gearbox ECU.
 
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
 
3.GODIAG GT107 + analog ignition switch is in “manual” mode if the ignition switch is pressed, the adapter displays the current working voltage of the power
supply, and the current working current of gearbox ECU.
 
4.Connect OBD2 data reading and writing device or diagnostic device.
 
5.Perform Gearbox ECU data reading, writing or diagnostic operations.
 
 
Godiag GT107+ DSG Plus VS GT107 DSG
                                 
*Product  *GT107 DSG  *GT107+ DSG Plus
120 ohm CAN resistance switch indicator No Yes
Voltage display No Yes
Current display No Yes
Support disassembly and connect with wire, convenient for DIYs. Or connect with professional adapter No Yes
Support other Gearbox ECUs Less
  • Add VCC GND cable, support more gearbox ECUs

 

 

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 7 / 7
CGDI Prog BMW MSV80 CGDI Prog BMW MSV80
Add to wishlist
Add to compare
CGDI Prog BMW MSV80
$699.00

CGDI BMW Highlights:

  • High technical tool which mainly support Auto Diagnose, Programming and Security Maintenance 3 in 1.

 

  • BMW CAS3/CAS3+Data Repair--support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer, ISN code reading and writing.

 

  • Software response fast, short time programming, and new breakthrough in operation safety and technical support.

 

  • Multi-Languages: English, Spanish, French and Chinese
    If you need Italian, Polish or Turkish, please pay $130 to activate.

 

  • Certification: CCC,CE,GS, CCC,CE,GS,ISO with 1 Year Warranty
    Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.

 

  • Free Update Online Lifetime, when you receive the device, please download software Here, we will keep posting the latest software.
    Update frequently, zero cycle time, support model added in real time.

 

  • With 20 Free Authorizations:
    CAS1-3+ Key Match, CAS4 Key Match, Normal Mode Read ISN, Bootstrapper upgrades, FEM/BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable/Disable Key, BMW F Series Coding, EGS Empty and Clone, CAS Mileage Reset, Porsche 987/911 key learning, 95128/95256 Read and Write, BMW E Series Program, BMW E Series Codification, Maserati Meter Mileage Adjustment, BMW EWS Key Match, BMW Diagnosis, ICOM Function, CAS4 Key Match(OBD).
    Paid Authorizations:
    BMW Data modification and verification
    B48 B58 read ISN MSD80 / 81 /85 /87 MSV90 read ISN and N13 / N20 / N55 /B38 read ISN
    If you need BWM Full Version with All Authorizations

CGDI BMW Support Module list:

 

  • BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, key all lost matching, CAS computer replace, CAS3+/P4X above version can directly downgrade by OBD in 5 min
  • BMW CAS4/CAS4+/Support key matching,support key all lost matching.
  • Support BMW key inspection,can check key what status in.
  • Support BMW engine computer DME replacement.
  • Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exciusively support in Domestic
  • Support BMW Key unlock.
Model Add New Key All Key Lost Read ISN code Replace engine computer DME BMW Key unkock Working time
CAS1 support support     support 1 minute
CAS2 support support support   support 1 minute
CAS3 support support support   support 1 minute
CAS3+ support support support   support 1 minute
CAS4 support support support     30 seconds
CAS+ support support support     30 seconds

 

Regarding BMW Key Matching Function:

 

  • Read Key Information: Read out the anti-theft information and key information of the vehicle, such as VIN, Anti-theft version, Remote control frequency, Key number, key ID, key type, and key position status.
  • Generate Dealer Key: After selecting the blank key bit, click this function to match the new key.
  • Synchronous ELV: When the steering wheel lock fails; when the key is matched, the car cannot start.
  • Synchronize DME: When the key is matched, the car cannot be started. Please execute this function to synchronize the DME and CAS system.
  • Restore Key Bit: When this key bit is used, it can be initialized.
  • Unlock Key: restore the key to a brand new state, which can be used again.
  • Disable Key: When the owner's key is lost, the relevant key bit can be shielded so that it no longer works on the vehicle.
  • Enable Key: enable the disabled key bit to make the key work on the vehicle again.
  • Mileage Reset: The device can read the mileage information of the anti-theft module, and execute this function to make the mileage become 0.
  • Exit shipping Mode: When the vehicle is diagnosed with this fault code, please execute this function to eliminate the fault code and return the vehicle to normal.
  • Recovery Code: After the car is matched with a new key, there is a failure of no coding file, this function can be used to restore the original coding file.
  • Replace FEM/BDC/CAS4: When the car module is faulty, use this function to help the vehicle replace the module.
  • Backup FAFP: Applicable to BMW FEM/BDC modules, backup original FAFP files.
  • Restore FAFP: Applicable to BMW FEM/BDC module, write the required FAFP file.
  • Reset Starter Lock: After replacing the BMW FEM/BDC module, the vehicle does not start, please execute this function.
  • Remote Key Repair: When the EEPROM chip on the BMW FEM/BDC module is damaged or the data is lost, causing the key to fail, you can use this function to repair the original car key.

 

CGDI BMW Support Key Matching List: (Keep Updating)

 

BMW 1 Series: E81, E82, E87, E88, F20, F21, F52, F40
BMW 2 Series: F22, F23, F44, F45, F46
BMW 3 Series: E36, E46, E90, E91, E92, E93, F30, F31, F34, F35
BMW 4 Series: F32, F33, F36
BMW 5 Series: E34, E39, E60, E61, F07, F10, F11, F18
BMW 6 Series: E63, E64, F06, F12, F13
BMW 7 Series: E38, E65, E66, F01, F02, F03, F04
BMW 8 Series: E31
BMW X1: E84, F48, F49
BMW X2: F39
BMW X3: E83, F25
BMW X4: F26
BMW X5: E53, E70, F15
BMW X6: E71, E72, F16
BMW M2: F87
BMW M3: E90, E92, E93, F80
BMW M4: F82, F83
BMW M5: E60, F10, F90
BMW M6: E63, E64, F06, F12, F13
BMW M8: F91, F92
BMW X3 M: F97
BMW X4 M: F98
BMW X5 M: E70, F85, F95
BMW X6 M: F94
BMW Z3: E36, E37
BMW Z4: E85, E86, E89
BMW Z8: E52
BMW MINI: R50, R52, R53, R54, R55, R56, R57, R58, R60, R61, F54, F55, F56, F60
Porsche: 911, Boxster987

 

CGDI BMW Support Reading and Writing BMW DME ISN via OBD List: (Keep updating)

 

B48, B58
MEVD172Y F10 MOTOR  Engine electronics MEVD172 6 Cylinder
MEVD1724 F25 MOTOR  Motor Electronics N20
MEVD1725 F20 MOTOR  Motor Electronics N13
N63TU_R0 F01 MOTOR  Engine electronics MEVD172 8 Cylinder N63TU Master
N63TU_L0 F01 MOTOR2 Engine electronics MEVD172 8 Cylinder N63 TU Slave
S63TU_R0 F10 MOTOR  Engine electronics MEVD172 8 Cylinder S63TU Master
S63TU_L0 F10 MOTOR2 Engine electronics MEVD172 8 Cylinder S63 TU Slave
ME17N45  E87 MOTOR  Motor Electronics N45
MEV17N46 E87 MOTOR  Motor Electronics N46
MED17_2  R56 MOTOR  Motor Electronics
MED17_2N R56 MOTOR  Motor Electronics
MV1722   R56 MOTOR  Motor Electronics N16
MVD1722  R56 MOTOR  Motor Electronics N18H
MEVD174K E84 MOTOR  Engine electronics ME VD17.2.4 4 Cylinder N20
MEVD17KW E70 MOTOR  Motor Electronics N55
MEVD174K E84 MOTOR  Motorelektronik ME VD17.2.9 4 Zylinder N20
MEVD176K E89 MOTOR  Engine Electronics ME VD17.2.6 6 Zylinder N55 Bosch High pressure pump
MEV17_2  R56 MOTOR  Motor Electronics
MSV70    E63 MOTOR  Motor Electronics N52
MEV9N46L E87 MOTOR  Motor Electronics N46
ME9N62   E65 MOTOR  Motor Electronics N62
MEV9N46  E46 MOTOR  Motor Electronics N46
N62_TUE  E65 MOTOR  Motor Electronics N62
N62_TUE2 E65 MOTOR  Motor Electronics N62
MEV9N46L E87 MOTOR  Motor Electronics N46
ME9N62   E60 MOTOR  Motor Electronics N62
MEV9N46L E90 MOTOR  Motor Electronics N45
ME9N62   E60 MOTOR  Motor Electronics N62
MS450DS0 E60 MOTOR  Motor Electronics M54
MS450DS0 E65 MOTOR  Motor Electronics M54
ME9N62_2 Mor MOTOR  Motor Electronics
ME9N62_2 E65 MOTOR  Motor Electronics N62
ME9E65_6 E65 MOTOR  Motor Electronics N62
ME9E65_6 E60 MOTOR  Motor Electronics N62
ME9N45   E87 MOTOR  Motor Electronics N45
ME9N45   E46 MOTOR  Motor Electronics N45
N73_R0   E65 MOTOR  Motor Electronics N73 Master
N73_L0   E65 MOTOR2 Motor Electronics N73 Slave
MSS60    E90 MOTOR  Motor Electronics S65 

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 0 / 0
CGDI Pro CGDI Pro
Add to wishlist
Add to compare
CGDI Pro
$449.00
In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 0 / 0
CGDI FEM / CGDI CAS 4 Bungle CGDI FEM / CGDI CAS 4 Bungle
Add to wishlist
Add to compare
CGDI FEM / CGDI CAS 4 Bungle
$118.00

Highlights:

  1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
  2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
  3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
  4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
  5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
  6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
  7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

 

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

  • DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
  • Ignition simulated start switch.
  • Immobilizer dashboard simulated indicator.
  • Key sensing area.
  • Screw bolt.
  • Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
  • Godiag OEM dedicated CAS4 CAS4+ start control adapter. 

GODIAG BMW FEM/BDC Test Platform

 

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 1 / 1
Adapter FC200-MPC5XX-P02-M230102 Adapter FC200-MPC5XX-P02-M230102
Add to wishlist
Add to compare
Adapter FC200-MPC5XX-P02-M230102
$120.00

CG FC200-MPC5XX Adapter for BOSCH MPC5xx Read/Write Data on Bench

PN: FC200-MPC5XX-P02-M230102

FC200 Software V1.1.3.0 adds BOSCH MPC5xx platform mode ECU:

(A) BOSCH ECU (Add BOSCH MPC5xx platform mode ECU)

ME9.0

MED9.1

MED9.5

MED9.5.10

EDC16C2

EDC16C8

EDC16CP31

EDC16CP35

(C) KEFICO ECU

CPEGD2.20.x

(D) DELPHI ECU (Add Mercedes Benz CRD2. x MPC556x engine platform mode)

In Stock
  • Secure payments
  • Shipping by UPS & USPS
  • Warranty on Scanners and Machines
Already sold: 1 / 1

Recently viewed products