OEM BMW FEM-BDC 95128/95256 Chip Anti-theft Data Reading Adapter 8Pin Adapter Work with VVDI Prog/CG Pro 9S12/Orange5

BMW FEM-BDC can read and write anti-theft data, and it is safe and stable without losing data.

Features:

Read and Write Anti-theft Data
Convenient and Safe
Stable without losing Data
Anti-theft 95128/95256 Meter 35080/35160

With this tool it is possible to force the ignition (Pin 15 in Vag vehicles from the OBD2 port). This allows you to activate the vehicle's control units and establish OBD2 communication without having an ignition key. It has a male OBD2 port on one end and a female OBD2 port on the other end that allows diagnostic equipment to be connected to this connector, the K-LINE, L-LINE and CAN connections pass through the device and there will be communication to the vehicle. The connector has a power switch / a LED indicates when the connector is in operation, to confirm the power-on status.

Overview:
The OBDSTAR RH850/V850 Adapter Full Kit is a professional solution for advanced key programming, airbag reset, immobilizer (IMMO) data reading, and pincode retrieval. Designed for automotive locksmiths and ECU specialists, it supports a wide range of RH850 and V850 processor-based systems, including Volkswagen MQB, Ford/Lincoln, Nissan/Renault, FCA, and more.

Key Functions:

1. Volkswagen MQB48-5A Key Programming (Components Removing Free)

• Supports dashboard, ECM, and TCM data reading & IMMO data decryption via BENCH/BOOT
• Compatible with MQB48-5A systems (MQB49-5C in development)
• All Keys Lost (AKL) synchronization code calculation for BLADE & PROXIMITY keys
• ELV IMMO data acquisition via MP001 + RH850/V850 adapter

2. Ford/Lincoln 2021+ Key Programming (Including AKL)

• Supports models such as F-150, Bronco, Navigator, Mustang Mach-E, Explorer, and more

3. Nissan/Renault Key Programming (Including AKL)

• Supports Nissan Sentra, Rogue, Pathfinder, Juke, Qashqai, and more

4. FCA Key Programming (Upcoming Upgrade)

• Fiat 500E, Alfa Romeo Tonale, Jeep Renegade, Dodge Hornet, and others

5. Airbag Reset

• Read, write, and clear crash data for a wide range of brands: Subaru, Toyota, Lexus, Volvo, Mazda, Jaguar, Tesla, Ford, GM, Honda, Hyundai, Kia, VW, and more

Package Includes:

• RH850/V850 Adapter Board (C4-06)
• MCU Boards (C4-06-C01, C4-06-C02)
• W010 & W010A Cables
• Dedicated Decryption Jumpers (5 sets)
• MQB Collector
• ECM-001 Module
• M002 Cable Set
• TCM-MAIN Cable
• Converter V2
• TCM-030 Cable
• Optional TCM-KIT 1 / TCM-001 / TCM-002 / TCM-005 (sold separately)

Supported Tools:

• KeyMaster G3 (Recommended)
• Requires MP001 multifunction programmer for use

The BMW ISN reading cable is required to read the BMW ISN number on the bench without the car BMW ISN code is required when programming BMW CAS3+ all keys lost the smart key

Connect the BMW DME ISN reading cable with the BMW ECU and the BMW key programming device, and start BMW ISN reading procedures from BMW DME, BMW ISN reading is done without drilling a hole in DME for the BMW DME boot bin.

How to read BMW MSV80 ISN using the VVDI2 BMW key programmer

• Connect BMW DME with the VVDI2 using the BMW ISN reading cable
• Go to the key learn section in the VVDI2, then select ECU ISN reading
• Select the BMW DME Type you need to read the ISN
• Press Read BMW ECU information
• The VVDI 2 will show you the BMW ECU info
• Press Read BMW DME ISN
• BMW ISN code reading required approximately 8 minutes
• After BMW ISN reading success the VVDI2 will show the DME ISN code
• Save the BMW ISN code to process with the BMW smart key programming

BMW ISN cable-supported DME (ECU)

• BMW MSV80 ISN reading
• BMW MSV801 ISN reading
• BMW MSD80 ISN reading
• BMW MSD81 ISN reading
• BMW MSD802 ISN reading
• BMW MSD812 ISN reading
• BMW MSD851 ISN reading

BMW DME ISN reading cable is compatible with

• Xhorse VVDI 2 programmer
• Xhorse VVDI BMW programmer
• BMW AutoHex III programmer
• CGDI BMW key programmer
• and other BMW DME ISN reading devices

BMW CAS ISN reading supported system:

• BMW CAS3 ISN reading from DME
• BMW CAS3+ ISN reading from DME
• BMW CAS3++ ISN reading from DME
• BMW CAS3+ ISTAP ISN reading from DME

BMW ISN reading cable-supported vehicles:

• BMW E series DME ISN reading 2006-2014
• BMW E90 DME ISN reading 2006-2014
• BMW E92 DME ISN reading 2006-2014
• BMW E60 DME ISN reading 2006-2014
• BMW E87 DME ISN reading 2006-2014
• BMW E89 DME ISN reading 2006-2014

Works with XHORSE VVDI2 or CGDI BMW, read out BMW ISN on bench
Connect the Cable with ECU and device. Don't need drill hole for boot pin.

• Autel G-BOX3 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

CG FC200-MPC5XX Adapter for BOSCH MPC5xx Read/Write Data on Bench

PN: FC200-MPC5XX-P02-M230102

FC200 Software V1.1.3.0 adds BOSCH MPC5xx platform mode ECU:

(A) BOSCH ECU (Add BOSCH MPC5xx platform mode ECU)

ME9.0

MED9.1

MED9.5

MED9.5.10

EDC16C2

EDC16C8

EDC16CP31

EDC16CP35

(C) KEFICO ECU

CPEGD2.20.x

(D) DELPHI ECU (Add Mercedes Benz CRD2. x MPC556x engine platform mode)

GODIAG Gearbox Cable 9-in-1 Set for V-A-G V30/ DQ200/ DL501/ VL300/ VL381/ DQ500/ DQ250/ DQ380/ DQ381/ DQ400E/ DL382 

Highlights:

1. Supports connections to the AUTEL G-BOX, XHORSE MULTI-PROG, and all other OBD2-connectable devices, including the OBD2 BENCH PCMflash FC200, KESSV2, for diagnostics, data read/write, and cloning.
2. Supports V-A-G Gearbox V30/DQ200/DL501/VL300/VL381/DQ500/DQ250/DQ380/DQ381/DQ400E/DL382 for direct connection to the AUTEL G-BOX and XHORSE XDMPG0GL MULTI-PROG.
3. Equipped with an OBD2 BENCH adapter, it allows for connection to a wide range of devices.
4. Can also connect to our GODIAG GT107+ DSG Plus Gearbox Data Adapter  for automatic and manual PCMflash reading/writing.

Compared with GODIAG Gearbox Cable 7-in-1 Set  GODIAG Gearbox Cable 9-in-1 Set has the following new features

1. Adds DQ400E/DL382
2. Equipped with an OBD2 Bench connection adapter, allowing for connection to a wide range of devices.
3. Can connect to a GODIAG GT107+ DSG Plus Gearbox Data Adapter for automatic and manual PCMFlash reading and writing.
4. The adapter can directly connect to the AUTEL G-BOX, XHORSE XDMPG0GL MULTI-PROG.
5. The adapter includes a DIY OBD2 CANBUS K-Line connection. It also supports DIY OBD2 Bench setups.

Xhorse Replacement Battery for Xhorse Condor Dolphin XP-005 and XP-005L Automatic Key Cutting Machine.

Features:

Color: silver

Weight: 850 g

Input voltage: DC25.2V - 2550mAh 64.26Wh

MPN: XP0510EN

Was designed to reset the spindle and plunger misalignment that occurs during the removal of the ignition cylinder on most 2012 and newer Honda ignition housings.
During the removal of the ignition cylinder the spindle in the housing gets pulled slightly outward. Once this happens the ignition will not operate until the spindle has been put back into its proper position.

Until now this typically requires drilling, or the entire ignition housing to be removed to reset the plunger and the spindle.