Highlights:

1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily. 
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Ben Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Add Vehicle Engine Data Calculation and Processing (MED17, EDC17 etc)
4. Support Checksum Function
5. Newest Software Version: V1.0.9, Hardware Version: V1.1.5

Xhorse Multi-Prog Free Software Download

Xhorse Multi-Prog Functions:

1. Read, Write and Clone ECU
BMW B48/B58 reading ISN 
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
VW BOSCH MED17 Series ECU 
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
With Free MQB48 License. Bind Multi-prog and VVDI2 full version to the same Xhorse app account to use MQB48 NEC35XX function
Also Compatiable with Xhorse MQB Solder-free Adapters

2. Read, Write and Clone TCU
Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU

3. Vehicle Engine Data Calculation and Processing
MEDl 7/EDC17 data processing

4. Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services

5. Read & Write MCU
Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
Support certain encrypted chip reading and writing

6. Read & Write Vehicle Immo Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,
VW MQB dashboard, AUDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules
Note:Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM
Support EEPROM and FLASH

8. Read & Write Vehicle Dashboard
Support dashboard of VW, Honda, Hyundai, Kia, etc.

Xhorse Multi-Prog ECU and TCU List: (Keep Updating)

ECU (Bench Mode):

VAG 
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MG1CA811
3. BOSCH: MED17.1.6, MED17.1.21, MED17.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED1 7.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
4. BOSCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01, EDC17U05
5. BOSCH: MG1CS002一SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777, MG1CS002_TC298TP, MD1 CP004_TC298TP, MD1 CP004一SPC5777, MG1 CS111 一SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
6. CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90 
2. BOSCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP (B38, B48, B58), MD1CS001_TC298TP, MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
3. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
4. BOSCH: MEI 7.2.1
5. BOSCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K 
6. OSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz
1. CONTINENTAL: SIM271 DE, SIM271 KE
2. BOSCH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. BOSCH: CRD3x.x_TC1793, CRD3x.x_TC1 797
5. BOSCH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1CS006_TC298TP

GM
1. DELPHI: DCM3.7AP
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Nissan
1. DENSO: 23740-3Nxxx_Gen1 SH72531
2. BOSCH:EDC17C84

Hyundai/Kia
1. BOSCH: ME17.9.11, MEI 7.9.11.1
2. BOSCH:EDC17C53
3. BOSCH: MEG17.9.1 2_ECU

Ford
1. BOSCH: EDC17C70, EDC17CP65
2. BOSCH: ME17.0.3, ME17.8.5

Volvo
BOSCH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22

Other
1. AM_ME1 7.8.5,DOO_ME17.8.5
2. BOSCH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767, ME1 7.8.31, ME1 7.9.52
3. BOSCH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14, EDC17c81
4. BOSCH: MEVD1 7.8.4
5. BOSCH: MED17.8.1 0_TC1 728, MED17.8.1 0_TC1 728_Hw2, MED1 7.8.1 0_TC1 767
6. BOSCH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1CS163, MD1CS01 2, MD1CS089, MD1CS069, MD1CS005_TC298TP, MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP, MG1CS01 7_TC277TP, MG1CS01 8, MG1CS019, MG1CS088
7. CONTINENTAL: SID208, SID209, SID211, SID807EVO ⑧ DENSO: KH, ZY, SH70xx_275xxx-xxx

ECU (Boot Mode):

VW series
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MED17.1.6, MED17.1.21, MED1 7.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED17.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
3. BOSCH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01, EDC17U05
4. BOSCH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW series
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
3. BOSCH: ME1 7.2.1
4. BOSCH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G(N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
5. BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz series
1. CONTINENTAL: SIM271 DE,SIM271 KE
2. BOSCH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. DELPHI: CRD2.x_MPC556x

Nissan series
BOSCH: EDC17C84

GM series
1. DELPHI: MT80.MT80.1
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Hyundai/Kia series
1. DELPHI: MT86
2. DELCO: DCM6.2AP

Other
1. CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
2. SDI21.1 ,SDI21.2,SDI21.3
3. BOSCH: ME1 7.3.0
4. MARELLI: 8DF, MM10JA

TCU (Bench Mode):

VW
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx, DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250

Exx/Fxx BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2

Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT

Ford series
1. ETRAG MPS6GETRAG
2. DPS6, DC4

TCU (Boot Mode)

Ford series
DPS6, DC4

Other
ZF 9HP

Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
43pcs x ECU Cable Plugs
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity 

Autel MaxiIM IM608 II is the newest all-in-one OBD diagnostic tool this year, combining full IMMO and programming function coverage, all system diagnostics, 36+ maintenance functions, ECU coding and ECU online programming (J2534 JVCI compatible) and more. It functions exactly the same as Autel MK908P II or MaxiSYS MS908S Pro II. 

Main Configuration Updates Based on Autel IM608 Pro:

• Operating system move on to Android 10 from Android 4.4.
• Upgraded 8-core Qualcomm SDM660 8-Core Processor replacing old Exynos T5260 6-Core Processor.
• Doubled RAM & ROM: 4GB/128GB; SD card support up to 64GB (IM608 Pro support max 32GB)
• 16MP Rear camera replacing the previous 8MP one.
• Optimazed newest Software version & More Intuitive Interface.

Autel MaxiIM IM608 II Features

• No IP Limitation: You Can Use it All Around the World without Limitation
• One Year Free Update Online (After One Year, IM608 II Software Subscription Cost $850/Year)
• Upgraded Version of Autel IM608 and IM608 PRO, with the latest powerful hardware configuration
• Smart Mode and Expert Mode Solution In One Tool to Easy Operation with Ambient Light Sensor – detects ambient brightness.
• Support Multi-Language: Both Diagnose Software and IMMO Software Support Multi-Language. (Default Language is English, Can Be Changed Language to German, Swidish, Italian, Portuguese, French, etc.)
• Works for 85% Cars In The Wordwide, Include BMW, BENZ, VW, AUDI etc. make your work simple and easier, Best Choice for Locksmith and Workshop
• Extended to Work with Autel MV108/ MV105 allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure safely and quickly.

Autel MaxiIM IM608 II Top Highlights

Upgraded from IM608/IM608PRO, the IMMO & key fob programming tool IM608 II can also read the immobilizer pin codes and password directly from the vehicle and store the information to do key learning for the newly programmed keys. The professional key fob programming tool Autel IM608 II has covered almost all the key programming functions:

• Auto Detect Make/Model/Year/System
• Read PIN (All Key Lost), Key Learning
• IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding
• VW MQB Key Learning, Mercedes Key Learning
• B~MW FEM/BDC Key Learning and Adaption, Programming and Coding functions for lMMO related systems: DME,JBE,FRM,CAS, KOMBI,EGS, GwS,ZGW, ELV and FZD
• B~MW CAS4 Key Learning and Adaption
• Mercedes-Benz: Coding SCN for lMMO related systems;DAS, ECU, TCU, ISM and ESL
• 2015-2018 Land Rover & Jaguar write key via dump
• Volvo Smart Key Learning/knob-style smart key

Expanded adapter set for the IM608 II with the XP400PRO:

• Supports over 10 key unlock types
• BMW EWS3 key learning
• Benz NEC key learning
• Benz ESL_W209 read/write/erase

Autel - MaxiIM IMKPA

This Expanded adapter set for the IM608/IM508 with the XP400PRO Autel key programmers

• Supports over 10 key unlock types
  
• BMW EWS3 key learning
  
• Benz NEC key learning
  
• Benz ESL_W209 read/write/erase
  
• Compatible with IM508 and IM608 Autel key programmers (XP400Pro required)

Autel - APB 112

• Autel APB112 Smart Key Emulator
• Supports 46, 4D Data Collection
• Supports 46 Smart Key Password Calculation
• Supports 46 Chip Emulation
• Supports Toyota4D (94/D4, 98) Smart Key Emulation
• Supports Toyota H (88/A8, A9, 30) Smart Key Emulation

Autel - G-BOX2

• Autel G-BOX2 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

Key Features

• Master version: Unlike the Salve version in other tools, with Hexprog II users can read/write files without restrictions.
• Supports one of the largest Ecu/Tcu list in Cars, Trucks, Bikes and Boats for Ecu cloning and Chip Tuning, check Hexprog II Ecu List
• Supports both old and latest Ecus/Tcus from Bosch, Continental, Delphi, Marelli, Denso, Temic, TRW and Valeo... etc.
• Reads BMW long ISN from BMW DME and DDE including MD1 and MG1 in F/G series.
• Supports online services like IMMO OFF, DPF OFF, EGR OFF, AdBlue,,,, etc.
• A dedicated support team with ticketing system ensures that technical issues are quickly resolved.
• Three Years Hardware Warranty.

Hexprog II Information

To know more about Hexprog II, please see below links:

• Hexprog II Supported Ecus and Tcus List
• Hexprog II User Manual
• Hexprog II Tuner Software Download

Introducing the Hexprog II Ecu programming tool, the pinnacle of ECU cloning and chip tuning advancements. Through meticulous observation of the strengths and weaknesses of previous generations, we have created a solution that attends to every detail.

Our extensive experience has been harnessed to develop a lightning-fast, dependable, and user-friendly software. The outcome is nothing short of remarkable an extraordinary tool that seamlessly caters to the needs of its users.

On Bench Chip Tuning/Ecu Cloning

Our advanced system offers you the ability to effortlessly read and write various memory types, including P-Flash, D-Flash, External Flash, and external EEPROM. What sets our solution apart is the convenient option of automatic checksum correction.

When it comes to accessing Ecus, you'll have two highly effective methods at your disposal:

• Bench Mode: Experience the convenience of this option, which eliminates the need to open the Ecu cover. By simply plugging in the required power and signal wires, you can quickly and easily begin working with the Ecu.
• Boot mode: In situations where the Ecu is unresponsive, our boot mode comes to the rescue. To utilize this method, opening the Ecu and connecting the boot wire to the Ecu board is necessary. This approach proves invaluable when troubleshooting and resolving issues with non-responsive Ecus.

OBD Chip tuning/ Ecu Repair

Hexprog II, developed by Microtronik, is a cutting-edge programming tool that offers an array of advanced features and capabilities. With Hexprog II, you can effortlessly read and write the map area of various Ecus, and it even supports virtual read functionality, providing an added layer of convenience.

But that's not all - Hexprog II goes beyond basic programming tasks. It incorporates essential functions, including VIN Changing, Coding backup/restore, and Fault codes read/erase. This comprehensive suite of features ensures that you have everything you need to efficiently work with Ecus and perform critical operations.

Leveraging Microtronik's extensive experience in car Ecu flashing and coding, Hexprog II stands as a testament to their expertise. Drawing upon this wealth of knowledge, Microtronik has meticulously crafted Hexprog II to be one of the most safe Ecu programming tools available through OBD. Hexprog II combines cutting-edge technology with the utmost attention to security, providing you with a reliable and secure programming solution for your Ecu needs.

BMW ISN reading

Hexprog II incorporates a crucial feature derived from Autohex II: ISN management. Building upon the success of its predecessor, Hexprog II embraces this essential functionality, elevating its capabilities to new heights.

One of the standout features of Hexprog II is its ability to read the complete long ISN (Individual Serial Number) from any BMW Ecu. This includes even the most recent Bosch MG1/MD1 Ecus, spanning from 2005 to the present day DME/DDE models. With Hexprog II, you can confidently access and retrieve the ISN information you need from a wide range of BMW Ecus, providing you with comprehensive control and compatibility.

By integrating this advanced ISN management functionality into Hexprog II, we empower you with the tools necessary to tackle the latest BMW Ecus, ensuring compatibility and accuracy in your operations. Hexprog II is your go-to solution for ISN management, designed to meet the demands of modern BMW vehicles and provide you with a seamless and efficient experience.

Compare to Hexprog

Hexprog II stands as a specialized tool that caters to both Ecu repair and chip tuning needs. This dedicated solution is specifically designed to excel in these areas, providing unparalleled functionality and performance.

On the other hand, Hexprog is a versatile multi-function tool, you gain the ability to read and write Immo modules, including CAS and BCM. It also offers support for Keys Reset and EEProms reset, adding to its comprehensive range of capabilities.

Hexprog II supports all types of protocols/connetion methods of any Ecu/Tcu, but it does not support other functions available in Hexprog.

However, it's important to note that Hexprog has certain limitations. While it covers a wide range of functionalities, it does not support all types of Ecus/Tcus connections, such as DAP, NBD, and certain JTAG variants.

To better understand the differences between Hexprog and Hexprog II, refer to the table below for an overview of their key distinctions:

It supports the following functions:

• OBD function for VW, Audi, Skoda, Porsche, BMW , Seat, Bentley
• Supports BMW CAS1, CAS2, CAS3 by OBD and CAS4 by Eeprom
• AUDI Generation 5, BMW OBD Function and BMW CAS4+ Functions
• Transponder chip programming - Read/Write/Copy/Verify
• Immobilizer Data Tool and Remote Programming
• Support of third-party software (ODIS, VAS5054, Techstream, HDS)
• Auto detect transponder and Remote frequency test
• Online firmware and software update (Free Lifetime Updates)
• 8 month Xhorse warranty

Includes

• VVDI2 Base Unit
• OBD2 Cable with K-Line Connector
• USB Data Cable
• 5th BDM Programming Cable
• Remote Programming Cable

Includes the Following Software:

NOTE: We suggest you create a folder on your desktop, exclude it in Windows Defender and put the files inside it. This way windows defender does not delete anything. You will have to extract the files and run them from there. The software is portable and doesn’t install on the PC.

CGDI MB Key Programmer Highlights:

• Supports fastest Benz Car key add: collection time 1'50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.
• Work with both BE key and original key
• With new Diode equipped, which makes infrared more sensitive to keyless go key. No need to replace diode chip yourself anymore.

All Key Lost Support List: :

• W164, W216 (2009-)
• W164, W216 (2009-)(Fast)
• W164 (Old), W221 (-2009)
• W164 (Old), W221 (-2009)(Fast)
• W166, W197, W212(Old), W212, W246
• W169
• W169 (Fast)
• W172, W204, W207, W209, W211
• W172, W207, W209, W211(Fast)
• W202, W203, W208, W210, W463, W639 (K)
• W202, W203, W208, W210, W463, W639 (K)(Fast)
• W215 W220
• W230
• W639 (CAN 2009-)
• W639 (CAN 2009-)(Fast)
• W906
• List keeps updating

Support more old Mercedes cars key programming by OBD compared to other Mercedes key programmer like VVDI MB BGA, such as:

• W210, W203, W639, W220,W215, W169
• Mercedes E Series W210 before year 2004
• Mercedes C Series W203 before year 2005
• Mercedes V Series V639 before year 2008
• Mercedes A Series W169 before year 2009
• Mercedes B Series W169 before year 2009
• Mercedes S Series W220 before year 2005
• Mercedes E Series W211 before year 2008

CGDI MB support ECU renew on these models at present:
ME9.7, MED17, CR3.xx, CR4.xx, CR5, CR60.xx, CRD.11, CRD2.xx, , SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LE, SIMELKE
Support Gearbox Renew on EGS 7G

Mileage Repair and Gateway Read/Write Authorization Free (Since March, 2019) and FBS4 Mileage Repair.
Mileage Repair Support Mercedes List:
C(W204) / GLK(X204) / CLK(207) /E(W212) /SLS(197) /CLS(W218) / R-Class(W251) /GL(X164) / ML(W164) / E-Class(W211) / CLS(W219) S-Class(W211) / CL(216) C-Class(W203/ CLK(W209) / SLK(R171), Keep Updating.

Function List:
EIS Function - 

• Support OBD mode and infrared mode to automatically recognize EIS and read data. (FBS3/FBS4)
• Support the identification of SSID and EIS number. (FBS3/FBS4)
• Support to read/modify VIN. (FBS3 and FBS4 only support reading)
• Support reading kilometers. (FBS3/FBS4)5.Support reading KEY track code. (FBS3)
• Support the detection of KEY usage and enabling status. (FBS3/FBS4)
• Support to read the last used KEY position. (FBS3/FBS4)
• Support reading the penultimate use KEY position. (FBS3/FBS4)
• Support detecting EIS status. (FBS3/FBS4)
• Support erasing EIS. (Online online, FBS3)11.Support writing EIS data. (FBS3)
• Support the protection of clearing TP. (FBS3)
• Support disabling EIS. (FBS3/FBS4)
• Support for enabling EIS. (FBS3)
• Support activating EIS. (FBS3)
• Support infrared mode to directly read the KEY password of W215 and a few W209/W211 EIS. (FBS3)
• Support EIS type:
  
  • W164, W251 -2009
  • W164, W251 2009-
  • W166, W197, W212, W218, W246
  • W169, W209, W211
  • W172, W204, W207, W212(ELV)
  • W202, W208, W210(K)
  • W203, W463, W639(K)
  • W215, W220(K)
  • W216
  • W221
  • W230(K)
  • W639 2009-(CAN)
  • W906

Key Read And Write Function:

• Support infrared mode to directly read KEY basic information, including SSID, available times, used times, KEY location, KEY status, KEY version.
• Support BE KEY infrared mode to directly read KEY password, erase, write new KEY data and activate.
• Support KEY write data with 21DF status.
• Support reading/activating the new BGA KEY.
• Support KEY hopping code repair.
• Support smart KEY (08/09) and non-smart KEY (40/51/57).
• Only support reset KEY chip type:
  00043650 chip
  00040582 chip
• Types of KEY chips that support reading, writing and resetting:
  00040229 chip
  567897041 chip
  567897051 chip
  567897061 chip
  567897071 chip
  567897081 chip
• Support CGMB KEY frequency switching, 433Mhz/315Mhz, resistance control arbitrary switching.

Password Calculation Function (Online):

• Support for having car keys and keyless (all lost) calculation passwords, of which all lost support normal collection and fast collection.
• To calculate the password, you first need to collect data, which takes about 3 minutes with the car key.
• In 99% of cases, the password is calculated at one time, and the time is about one minute.
• If there is a car key, calculate the EIS type supported by the password:
• Mercedes-Benz A series after 2004
• Mercedes-Benz B series after 2005
• Mercedes-Benz C series after 2001 (including W210)
• Mercedes-Benz E series after 2001 (including W203)
• Mercedes-Benz CL series after 2001
• Mercedes-Benz GLK series after 2004
• Mercedes-Benz ML series after 2003
• Mercedes-Benz R series after 2003
• Mercedes-Benz G series after 2003
• Mercedes-Benz S series after 2001 (including 220)
• Mercedes-Benz SLK series after 2003
• Mercedes-Benz SLS series after 2004
• Mercedes-Benz Vito series after 2003
• Mercedes-Benz Sprinter series after 2003
• If there is no car key, calculate the EIS type supported by the password:
• W164, W216(2009-)
• W164, W221(-2009)
• W166, W197, W212(old), W212, W246
• W169
• W172, W204, W207, W209, W211
• W202, W203, W208, W210, W463, W639(K)
• W215, W220
• W230
• W639(CAN)
• W906
• In the absence of a car key, some EIS support quick collection, the types are as follows:
• W164, W251 2009-
• W164, W251 -2009
• W169
• W172, W207, W209, W211
• W202, W203, W208, W210, W463, W639(K)
• W216
• W221
• W639 2009-(CAN)

Generate Key Data Function (Online):

• Load EIS data to generate KEY data.
• The time to generate KEY data is about 10 seconds.
• Support generating KEY data of HC05/908/912/9S12/NEC type EIS.

ECU/TCU/ISM Programming Function:
ECU: Automobile electronic control unit, also known as trip computer.
TCU: Automobile gearbox computer.
ISM: Car gear computer, also known as DSM and ESM.

• Support reading data of ECU/TCU/ISM.
• Support the erasing of ECU/TCU/ISM. (online)
• Support ECU/TCU/ISM data loading and saving.

ELV Function:
ELV: Car steering lock, also known as ESL.

• Support OBD mode to read ELV data directly. (Clamp on the ELV K line with a small yellow clip)
• Support to erase ELV. (Online)
• Support direct write direction lock data. (Online)
• Support for synchronizing ELV data.
• Support checking ELV damage.
• Support for activating ELV.
• Support to repair ELV.
• Support ELV type:
  W209, W211
  W204, W207, W212
  W169
  W639(NEC)
  W906
• Support W204/W207/W212 ELV simulator function

Car Mileage Repair Function:

• Support to read the internal data of the instrument, including serial number and mileage.
• Support for writing mileage information.
• Support to clear the fault code of the instrument.
• Support EEPROM reading and writing of the instrument.
• The supported instrument types are as follows:
• C-CLASS/CLK-CLASS: W203, W204, W205 (2014-2017), W209
• CLS-CLASS: W218, W219
• E-CLASS: W207, W211, W212
• GL-CLASS: X164
• GLK-CLASS: X204
• M-CLASS: W164
• R-CLASS: W251
• S-CLASS/CL-CLASS: W221, W222 (2013-2016)
• SL-CLASS/SLK-CLASS: R171
• SLS-CLASS: W197
• VITO/VIANO: W447(2014-2017)

ZGW Data Read And Write Function:
ZGW: Automotive Gateway

• Support ZGW's EEPROM/FLASH read and write.
• The types of ZGW supported are as follows:
• C-CLASS: W204
• E-CLASS: W211, W212
• M-CLASS: W164
• R-CLASS: W251
• S-CLASS: W221
• CLK-CLASS: X204, W207
• CLS-CLASS: W218
• SLK-CLASS: R171
• GL-CLASS: X164
• CL-CLASS: W216
• SLS-CLASS: W197

Functions of the Adapters:

EIS/ELV Test Line for Mercedes (without Having to Get on the Car)

Mercedes Locks Platform Test Line for W204 W212 W221 W164 W166 W205 W222

Scope of Applicationa:

The EIS ELV maintenance
Key programmer
Detection key

ELV Repair Adapter for CGDI MB Benz Key Programmer:

• Automatically forced clearing contents
• Enable ELV,Get out of suspended anim ation
• Virgin,Solve accidental errors
• Test Write ELV,Determine if it is working properly
• W204 W207 W212 W209 W906 Reparing locked chip

CGDI ELV Simulator Renew ESL for Benz 204 207 212 with CGDI MB Benz Key Programmer:

CGDI MB ELV Emulator is newly released adapter by CGDI Company, which can Renew ESL for Benz 204 207 212, work with CGDI MB Benz key programmer, can do the same function with Xhorse ELV Emulator with cheaper price.

Most W204 W207 W212 ESL will damage with EIS. In this case, there are two possible reasons and solution:
ESL motor is damaged and need to replace a new motor
NEC chip is locked, theoretically it can be unlock, actually it needs to replace new ESL.

CGDI MB AC Adapter Features:
Acquire data via OBD at a quick speed
No need to dismantle EIS
No need to plug and insert the cable
Save much data acquisition time

CGDI MB AC Adapter Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

• Language: English, Spanish, French, German and Chinese
•  

CGDI MB Prog Package List:
1pc x CGDI MB Multiplexer
1x AC Adapter
1x EIS Test Line
1x ELV Adapter
1x ELV Simulator

Highlights of condor mini plus 2: 

• Support Car, Motorcycle, Household keys.
• Update online directly on mini plus ii.
• Intelligent Indicator Light, 7'' HD Touch Screen.
• Key Blank Engraving
• Core Process
• Optical Key Bitting Recognition (Work with KEY READER)
• All-purpose Clamps Extraordinary Versatility
• All Key Lost Solution
• Key blank Engraving
• Key Data Customization
• Support Bluetooth and WiFi
• Key 3D Preview

Xhorse Condor XC- Mini Plus II can produce super high precision processing results. The finished keys passed the precision test of the advanced optical instrument. The machine can deliver high accuracy processing results even after cutting over 150,000 keys.

8-core Processor
With 8-core processor, Xhorse Condor XC- Mini Plus II can realize prompt response, faster running speed and high resolution.

Intelligent Color Synchronization
This smart indicator light, assembled by the advance LED chips and lamp shade, seamlessly automates the color with the change of real-time working status, ensures a stable light source and intelligent status indication with flicker-free illumination and long service time.

Red light – error warning
Blue light – normal working
Yellow light – info notification

Smart 2-in-1 M5 Clamp and Multi-purpose Clamps
Condor XC-Mini Plus II is equipped with M5 and M3 clamps.
M1, M2, M4 clamps are for options.
The multifunctional clamps support a variety of key types such as side, track, tibbe, F021&Citron SX9 keys, residential keys, etc.
 
M5 is a 2-in-1 clamp of M1&M2, supports 2 track external, channel track, standard single sided, 4 track external, 4 track internal, standard double sided, dimple key types.
More convenient to be switched into M1&M2 clamps directly, no need to install or disassemble clamps over and over again.

Smart User Interaction in Android
Powered by Android System, it provides stronger compatibility, faster running speed, and smarter user interaction. Fast and effective solutions are provided to make you an expert in all key lost.

All Key Lost Database 
Our built-in powerful database cover over 100 car brands, 2000 car models, 20000 keys All Key Lost data with a lifelong upgrade service for free.

7" Display Intelligent Touch Screen
With a resolution of 1280*720 pixels, laid out on a real estate of 7 inches, offers a much better picture quality on the screen to minimizes eye fatigue. The machine adopts an angle-adjustable capacitive touch sreen.

Intelligent Control Experience 
Users can easily complete operations on the clear screen with step by step operation guidance. The built-in powerful database contains accurate key data, detailed parameters and clear key graphics. Users can directly edit key data on the screen to complete key duplication.
 
Support Multiple Types of Keys
Automobile, motorbike, residential and other general keys.

Offline Operation Available
A lifelong online database upgrade service for free. To better serve users in a poor network environment. Offline operation is available after download the database.
 
Key Blank Engraving
Too many keys, hard to classify, would like a key with unque design?
Luckily, the key blank engraving function allows users to add and delete texts and pictures, resize and turn them, to perfectly design a unique key.

Optical Key Bitting Recognition
It's able to quickly and accurately identify almost all car keys, motorcycle keys, plastic keys and aluminium keys while connecting to key reader optical recognition avoid probe breaking identify key data faster.

Smarter APP Control 
Meet users' various demands on Xhorse APP. Connect the machine to the Xhorse APP for more functions, take photos to recognize bitting, key 3D preview, cut by bitting, find bitting, customize key data, etc. Take photo to recognize bitting: Import a photo or take a photo of the key to recognize key bitting.

Key 3D Preview
Preview the 3D shape of the target cutting key before starting key cutting work. Greatly avoid wasting the key blank.

Customize Key Data
Input customized key parameters, support machining the lastest key types and those not coverd by the built-in database.
 
Customize key data function, independently developed by Xhorse. Manually choose key type, input key data, then synchronize date with  key cutting machine to complete the key cutting process.

Manufacture Craftsmanship
All-aluminum body structure; Manufactured  by German-made DMG CNC machine to guarantee high precision cutting results. The finished keys passed the rigid test of the optical instrument. The transparent shield enables users to check the real-time working status while preventing metal debris from spattering.
 
Lifelong free online technical support
Xhorse offers a three-year warrenty for Condor XC- Mini Plus II. Technical videos and articles can be easily found on Xhorse APP which will greatly help you with your work. Click "Customer Service" on Xhorse APP to contact Xhorse technical support team.

CGDI BMW Key Programmer Full Version Highlights of CGDI BMW Full Version:

1. High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 2.
2. Support All 24 Authorizations Free: CAS1-3+ Key Match, CAS4 Key Match, Normal Mode Read ISN, Bootstrapper upgrades, FEM/BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable/Disable Key, BMW F Series Coding, EGS Empty and Clone, CAS Mileage Reset, Porsche 987/911 key learning, 95128/95256 Read and Write, BMW E Series Program, BMW E Series Codification, Maserati Meter Mileage Adjustment, BMW EWS Key Match, BMW Data modification and verification, BMW Diagnosis, ICOM Function, B48 B58 read ISN, CAS4 Key Match(OBD), MSD80/81/85/87/ MSV80 /MSV90 read ISN and N13 / N20 / N55 /B38 Read/Write ISN.
3. Free Update Online, when you receive the device, please download software Here
4. Lifetime Free License, device won't get expired, just renew license online for free when there is no day left.
5. Multi-Languages: English, Spanish, French and Chinese If you need Italian, Polish or Turkish, please pay $130 to activate.
6. With Free Reading 8 Foot Chip Free Clip Adapter and BMW OBD Cable in package