Product Description

GODIAG GT107+ DSG Plus Gearbox Data Adapter with inbuild CAN Resistor:

• GODIAG GT107+ DSG plus gearbox data adapter is a DSG gearbox connection adapter. DSG gearbox maintenance engineers can clone, diagnose and repair DSG gearbox ECU and can also read, write and adjust data for DSG gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.

• This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose "Manual". For other software kessv2, DQ200, DQ250, DQ500, you can also choose "Manual".

• Moreover, with the car battery power, the adapter can directly read and write DSG gearbox data and you can clearly check the communication status during the data reading and writing process.

GODIAG GT107+ DSG Plus Features:

1. The adapter is suitable for connecting VAG series gearbox ECUs, supporting gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501, Benz, BMW...

2. Voltage display: the user can know the current operating voltage of the gearbox ECU. If there is a short circuit or wrong wiring, the voltage will drop severely, which can be used to judge the problem.

Autel PowerScan PS100 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can:
1. Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.
Test for continuity with its built-in auxiliary ground lead.

2. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
3. Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
4. PS100 follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.

Autel PowerScan PS100 Feature and Functions:

Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc. Simultaneously uses the hot lead and the ground lead to activate components right in your hand Instantly identifies positive, negative and open circuits Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses Instantly checks continuity of switches, relays and diodes Circuit breaker protected Built-in Flashlight enables you to work in the dark Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment 20ft (extendable) cable provides excellent accessibility to test along the vehicle Extremely easy to use and highly reliable.

Autel PowerScan PS100 Specification:

Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery

Autel PowerScan PS100 Package List:

1pc x PS100 main unit
1pc x Probe Tip
1pc x 20ft. Externsion cable
1pc x Cigarette lighter adapter
1pc x Battery hookup clips
1pc x User Manual
1pc x Rugged blow molded case

The KeyMaster G3 USA STD 

From OBDStar is an intelligent, Android-based programming device designed specifically for immobilizer work on U.S. market vehicles. With a focus on IMMO functionality, OBDII diagnostics, EEPROM/MCU programming, and smart key operations, the USA STD version delivers essential capabilities for locksmiths and automotive technicians — without the added complexity or cost of ECU flashing or cluster calibration.

IMMO:

• Support for Volkswagen MQB key programming with free synchronization code calculation
• Proximity key programming for the latest Toyota models
• All-keys-lost programming for:
  • Nissan Rogue, Sentra, and more
  • Ford vehicles from 2021 onward
• PIN code reading support for Hyundai/Kia ID6A and related systems
• BMW motorcycle OBD key programming for ID8A, ID4D, and ID46 transponders 

Package Includes:

• KeyMaster G3 USA STD Main Unit
• OBDII Diagnostic Cable
• Power Supply & USB Cable
• Quick Start Guide
• Carrying Case

 KD-MATE is car key program device based on mobile KD app connection. With the matched adapter cable in the package, it can realize the Toyota smart key programming without pincde, and also can add Toyota all lost key without simulator. 

The device is updated iteratively with mobile KD app, it opens the communication channel between KD device and vehicle system, works with KD-X2/KD-MAX and KD remotes.

Functions supported now:

• Toyota (after year 2019) Hitag-AES (4A) smart key programming without pincode and all key lost programming without simulators (ZB remote emergency igniton), including new Toyota Corolla and Levin with 2000 FCCID.
• 4D smart key (including 0111/0140/0780/5380/7990) adding, all key lost and emergency ignition (4D transponder emergency ignition).
• 8A smart key (including 0020/2110/F43/3330/0410/0440/0010/0120) programming without pincode. 

XTOOL KC100 VW 4th & 5th and BMW IMMO Adapter for X100 PAD2/PAD3/PS90

XTOOL KC100 Compatible with: Xtool X100 PAD2, X100 PAD3, EZ500, PS80, PS90, A80 etc.

KC100 Adapter Functions:

1. Support VW/Audi/Skoda 4th generation, 5th generation, MQB key programming
2. Support VW/Audi/Skoda 4th-generation 96-bit online, 5th-generation online, MQB online key programming
3. Support BMW CAS1-CAS3++ key programming
4. Support Land rover (2015-) smart key write start key  
5. Support Fiat Viaggio, 500, Palio and other models
6. Support BMW EWS2 EWS3 EWS4 key programming
7. Support Toyota/Lexus all smart key lost key programming without dismantling, can realize 94, 98, 88, A8, A9, 39 simulation key generation (require KS-01 emulator as well). 
8. Matched Dashboard Type for 4th, 5th immobilizer of VW/Audi/Seat/Skoda: CDC24C32,NEC24C32,9S12, NEC24C64, NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.

Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Highlights of GODIAG GT100:

1. GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding.
2. It can convert the car OBD2 interface into 6 pin for signal detection. 
3. Able to connect the single modules or multiple modules of the vehicle.  
4. Connect with any diagnostic tool to tell whether the car communication is good or not. 
5. Supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, key remote control fails or the fault light turns on. 
6. One Year Warranty.
7. Work together with Xhorse VVDI2, Autel devices, Launch, Foxwell etc.
8. BMW CAS4 Test Platform function will be coming soon, and also will develop the connection cable for Benz and Chrysler, please wait.

The CAN FD Adapter from Autel is designed to connect to compatible vehicle communication interfaces (VCIs) to enable its tablets to communicate via the CAN FD (flexible data-rate) communications protocol and diagnose the vehicle. Vehicles currently using the CAN FD  protocol include many General Motors and Ford 2019 and 2020 vehicles. Autel's MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908S, MS908P, MS908SP, MSELITE, IM508, and IM608 tablets will be able to diagnose CAN-FD equipped vehicles when the adapter is plugged into the VCI directly as in the case of the smaller VCI units or into the OBD-II cable that is connected to the larger VCIs and into the vehicle's OBD-II port.

• Autel APB112 Smart Key Emulator
• Supports 46, 4D Data Collection
• Supports 46 Smart Key Password Calculation
• Supports 46 Chip Emulation
• Supports Toyota4D (94/D4, 98) Smart Key Emulation
• Supports Toyota H (88/A8, A9, 30) Smart Key Emulation