Teste Key:

HYN18R

OEM Part Number:

I/O Terminal Advantages

Combination of K-line and CAN interfaces provides ideal software compatibility without acquiring an expensive J2534 device

Reading and flashing of FLASH and EEPROM memory image using the diagnostic connector link.

Checksums testing and correction. Safe reading and flashing.

The software is marketed on a module basis. Each module is a separate program which functions independently with one joint adapter. You can download and use only the software you have licenses on. Licenses are stored on special cards which are to be inserted in the special adapter slot before the software use. Some license can be recorded on one card, others require separate recording.

Differences Among OBDSTAR Key Master DP Plus C Package (Full Version), A Package:

Key Master DP Plus C Full Configuration Diagnostic Function:

• Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions etc.
• Classify special function: ABS, EEPROM Adapter, Battery match, CVT learning, EPB, Gear learning, Immobilizer, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset.
• Specially designed for Android platform with clear and user-friendly interface.

Key Master DP Plus C Full Configuration Software Advantages:

1 ECU Clone

ECU Clone, means ECU duplication.

The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2 Clone directly when replacing a new or a used ECU

Without online matching in the 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3 Three features for ECU Clone:

1. Free of 4S online: break monopoly from 4S, benefiting automobile maintenance industry
2. Simplified operation procedures: realize foolproof operation
3. Non-dismantling with zero risks: read and write data without dismantling ECU

Switch activation function:

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CAN BUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

Add “Help “functions:

• Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
• Car list: directly get it on the device
• Upgrade Announcement: all details are available on the device
• Customers can look up the features or uniquely support functions on the device
• Help notes: built-in help notes for each model or function
• Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient

OBDSTAR Key Master DP Plus C Full Configuration Hardware Advantages:

• Built-in VCI box, communication more stable
• 8-inch touchscreen, more intuitionistic
• Can be charged directly via OBD interface
• Practical and high-end gift box
• Industrial design with silicone case
• Back bracket design: Can propone the steering wheel or stand on the table, easier to operate
• With simulated key 1 applies to the vehicle with 94/D4 type of smart key.
• 3 in 1 P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter
• Add the clip of reading SOP 8PIN EEPROM
• Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
• Maintenance Database
• Remote Assistant
• One Key Upgrade

• Specialized Design: Tailored for VAG MQB dashboard data reading to ensure accurate and efficient key programming.
• Comprehensive Compatibility: Works seamlessly with KD MAX key programmers ABK-5000 and the KD MATE OBD adapter ABK-5100. Suitable for major brands like VW, Audi, Seat, & Skoda.
• Future-Proof: Regular updates promise the addition of more modules & vehicles, ensuring the longevity of the device.
• User-Friendly Mobile App: Easy to navigate with clear instructions, the KeyDiy prog App provides essential wiring diagrams and procedures.
• Complete Kit: Comes with all the necessary components to get started, from the KD Mini Prog device to the quality certificate.

KEYDIY KD Prog Mini Functions:

• Read & Write MQB instrument cluster File with KD Prog Mini
• Calculate Anti-Theft Data for MQB
• Data repair for MQB instrument cluster
• Mileage repair for MQB instrument cluster

What is the KEYDIY Prog Mini C2 Adapter used for?

The KD Mini Prog C2 special adapter is a special component required for interfacing with various RH850 MQB dashboards. This adapter expands the device's capability to read and write data for a wide range of MQB instrument clusters, including multiple RH850 models such as:

• VAG MQB RH850 D70F3525 instrument cluster
• VAG MQB RH850 D70F3526 instrument cluster
• VAG MQB RH850 D70F3529 instrument cluster
• VAG MQB RH850 D70F3532 instrument cluster
• VAG MQB RH850 D70F3537 instrument cluster
• VAG MQB RH850 D70F3535 instrument cluster
• VAG MQB RH850 D70F3426 instrument cluster
• VAG MQB RH850 47F701401 instrument cluster
• VAG MQB RH850 47F701402 instrument cluster
• VAG MQB RH850 47F701404 instrument cluster
• VAG MQB RH850 47F701406 instrument cluster
• VAG MQB RH850 47F701407 instrument cluster
• and more will be added soon...

How to Use the KD Mini Prog:

1. Weld the cable harness to the corresponding instrument position according to the diagram available in the Mobile KD app.
2. Connect the KD Mini Prog wires, then link the KeyDiy Prog programming device with the KeyDiy KD Max programmer ABK-5000 or a compatible Android device.
3. Launch the Mobile KD app and navigate to Immo Programming > KD Mini Prog to initiate MQB dashboard data reading.
4. Ensure your KD-MAX or phone has sufficient power to guarantee successful reading.
5. Once dashboard data is successfully read, begin key programming with the KD-Max Key programmer ABK-5000.

How to Activate the KEYDIY KD Mini Prog

Activating the KD Mini Prog is an easy process. You can activate the device using your KEYDIY Max programmer for 5000 KD-Coin. These coins can be earned by generating KD remotes and KD smart keys. If your KD Max programmer doesn't have enough KD-Coin, You can Purchase the KD Mini Prog Activation using your KD Mobile App.

Remember, the activation of your KD Mini Prog is essential to be able to use it with your KD Max Programmer to unlock its full capabilities and ensure smooth operation in your key programming tasks.

KD Mini Prog Box Contains:

• KEYDIY KD Prog Mini programming device
• KD Mini Prog Special cable harness
• KD Mini Prog C2 special adapter
• KD Mini Prog Adapter plate
• KD Mini Prog 0TG cable
• KD Mini Prog Quality certificate

The KEYDIY Max is not just about programming keys. The KD-MAX can do so much more. From reading, cloning, Generating, and even editing transponder chips, The KEYDIY Max device has all the options you need. It also comes with a remote control frequency detector and ignition coil signal detection, ensuring that your key programming is precise and efficient.

One of its standout features is its versatility. Whether you're working on Toyota-Lexus smart keys for models up to 2023 or handling Volkswagen, Audi, Seat & Skoda MQB all keys lost, the KD-MAX has got you covered. Thanks to specialized KEYDIY adapters, even if all keys are lost, you can still program them without a hitch. (additional adapters required)
Safety is also a priority with the KD-MAX. It has a unique feature that detects remote control battery leakage, ensuring that your device lasts longer and works safely. And in today's digital age, being connected is more important than ever. That's why the KD-MAX comes with built-in WIFI & Bluetooth. Plus, its Type-C cable compatibility ensures faster data transfers and charging.
Step into the Future of auto key programming. Whether you're a seasoned professional or a newcomer, the KEYDIY KD-Max is a Worthy addition to your toolkit, promising unmatched efficiency and versatility.

KEYDIY KD Max Programmer Features:

• KEYDIY Smart Key & Remote Control generation for various vehicles.
• KEYDIY KD Max Programming Toyota - Lexus smart key all keys programming up to 2022 Requires KD Mate Adapter ABK-5100
• VAG MQB all keys lost programming Requires KEYDIY KD Mini Prog adapter ABK-5173 
• Renew used smart Keys & used remote control.
• Remote control frequency detection.
• Access card reading & cloning.
• Transponder chip reading, cloning, editing & generating
• Ignition coil signal detection.
• KeyDiy Remote Programming, Generation & Cloning garage remote HCS & Fixed code types
• Remote control battery leakage detection
• Built-in WIFI & Bluetooth connection
• Type-C Cable compatible
• And much more...

Locksmiths need a bit of brute force. Making gaps in UPVC doors to get to the mechanism, working with vehicles, whatever! Wield your massive, green, lock pick with pride, it'll save the day!

Lishi for Ford

Compatibility:

Lishi B108/B110 10 CUT COLORADO (TOY43R)

Compatibility:

Lishi B111 GM 30

Compatibility:

Lishi for Chrysler

Compatible