Compatibility:

Compatibility:

Compatibility:

With this tool it is possible to force the ignition (Pin 15 in Vag vehicles from the OBD2 port). This allows you to activate the vehicle's control units and establish OBD2 communication without having an ignition key. It has a male OBD2 port on one end and a female OBD2 port on the other end that allows diagnostic equipment to be connected to this connector, the K-LINE, L-LINE and CAN connections pass through the device and there will be communication to the vehicle. The connector has a power switch / a LED indicates when the connector is in operation, to confirm the power-on status.

Simplify the prosses of removing roll pins from OEM & aftermarket flip keys all others universal remote types that use interchangeable blades.

This new tool from the masterminds at Lock Monkey makes roll pin removal a breeze and with A LOT less breakage. 

Item Details 

-Used to extract roll pins from automotive remotes 

Fits all key types that use roll pins, including OEM and aftermarket 

-Perfect accompaniment for the Xhorse VVDI Key Tool and KeyDIY KD-X2

-Durable build and high quality assembly 

-Material Metal 

-Pin length 19.5mm 

Compatibility:

THINKCAR G3 Immobilizer Programmer is a kind of anti-theft product, which is a powerful chip reading and writing device. It is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + / FEM chip reading and writing, etc. it can be used with a variety of comprehensive diagnostic equipment, without binding, flexible, stable and reliable products. It is suitable for automobile electronic industry / locksmith / maintenance factory and other professional users.

GODIAG Full Protocol OBD2 Jumper Functions:
 
1. Supports DC power supply
2. Support safety protection banana head super programming dedicated connection port power supply.
3. Independent GND4, GND5 [meet the needs of special ECU programming].
4. With boot GND4 clip, compatible with programming equipment such as MPPS, FGTECH, KESSV2.
5. With GND4 GND5 short-circuit switch [some ECUs need to be switched to short-circuit mode when programming].
 
Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch.
 
6. With ignition analog switch [equipped with 1 large and 2 small dedicated ignition cables].
7. Support standard obd2 full protocol connection [double K line, double CAN line], 3 large and 2 small power plugs, 4 large GND, 4 small GND.
8. Equipped with CAN protocol communication resistance.

What is the analog ignition switch?
 
After the ING ignition switch is pressed, the line marked with ING12V will have 12v, which is the analog ignition switch. Because when some devices read some ECUs, the device will prompt to turn on or off the ignition switch.

GODIAG GD101 J2534 Highlights:

1. Support J2534 and ELM327 mode in one device. Switch mode automatically.

2. Compatible with Honda HDS 3.104.024, Toyota Techstream V17.30.011, JLR SDD V163, Forscan 2.3.48, scanmaster v2.1, pcm-flash 1.2.0, VAG ODIS 9.1.0 and Renault Clip V227.

3. GODIAG GD101 J2534 has the similar functionality as Tactrix Openport 2.0.

4. More speedup. Faster communication and reprogramming.

5. More stability. Never let you down while reprogramming.

6. Portable and convenient. Small package and easy to carry.

7. Wok on Windows 8/10/11, 32/64bit

8. Multi-Languages Available:

ODIS: English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech ,
Russia, Greece, Chinese

Toyota: English, French, Spanish, Japanese, German, Italian, Russian, Turkish, Chinese

Honda: English, German, Czech, Dutch, Finnish, French, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Slovenian, Spanish, Swedish, Turkish, Japanese ,Chinese

JLR SDD: German, English, Spanish, French, Italian, Dutch, Portuguese, Russian, Japanese, Chinese, Korean

Forscan: English, Russian, Polish, Italian, German, Hungarian, Turkish, French, Latvian, Bosnian, Finnish, Romanian, Portuguese, Traditional Chinese, Simplified Chinese, Czech, Lithuanian, Slovak , Ukrainian

Scanmaster elm 327: English, Czech, German, Spanish, French, Hungarian, Italian, Polish, Serbian, Turkish, Danish, Croatian

Pcmflash: English, Russian

Can Clip Renault: English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish

GODIAG GD101 J2534 OBD2 Openport 2.0 Features:

1. Support most all of J2534 compatible software (HDS, TIS, ODIS, JLR SDD, PCMFLash...). 

2. Support most all of ELM327 software (ELMConfig, Forscan, ScanMaster...).

3. Support ECU reprogramming in J2534 mode with programming voltage.

4. Supply free software for diagnosing J1979 compatible vehicles.

Notice:

1. Software Free Download:
Free Download Godiag J2534 Driver V2.3
Free Download ODIS V10.0 (Password: 6vi5ku)
Free Download JLR SDD V164
Free Download Can Clip Renault V227

For Honda HDS 3.104.024, Techsteam V17.30.011, JLR SDD V163, Forscan 2.3.48, Scanmaster v2.1, PCM-flash 1.2.0 and VAG ODIS 9.1.0, please contact online customer service on Whatsapp: +86 15827245313.

2. For PCMFlash 1.20, will need to buy a PCMtuner Dongle. And only supports the OBD part. It does not support bench, boot, vag, dsg and gearboxes.

3. Not Support Win7 System

GODIAG GD101 J2534 Supported Car Models:

1.JLR SDD Software for Land Rover/Jaguar
Support for L316, L319, L320, L322, L359, L538 Land Rover vehicle lines.
Support for X100, X150, X202, X250, X350, X351, X400 Jaguar vehicle lines.

2. HDS Software for Honda
Support for Accord, Civic, Crv, City, et al.

3. Toyota
Support for Camry, Rav4, Carolina, Prius, Lexus

4. ODIS VAG
Support for Vw, Audi, Seat, Skoda

5. GM GDS2 Software
Support for Buick, Chevrolet, Cadillac, etc.

GODIAG GD101 J2534 Function List:

Product Description

GODIAG GT107+ DSG Plus Gearbox Data Adapter with inbuild CAN Resistor:

• GODIAG GT107+ DSG plus gearbox data adapter is a DSG gearbox connection adapter. DSG gearbox maintenance engineers can clone, diagnose and repair DSG gearbox ECU and can also read, write and adjust data for DSG gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.

• This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose "Manual". For other software kessv2, DQ200, DQ250, DQ500, you can also choose "Manual".

• Moreover, with the car battery power, the adapter can directly read and write DSG gearbox data and you can clearly check the communication status during the data reading and writing process.

GODIAG GT107+ DSG Plus Features:

1. The adapter is suitable for connecting VAG series gearbox ECUs, supporting gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501, Benz, BMW...

2. Voltage display: the user can know the current operating voltage of the gearbox ECU. If there is a short circuit or wrong wiring, the voltage will drop severely, which can be used to judge the problem.

Highlights of GODIAG GT100:

1. GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding.
2. It can convert the car OBD2 interface into 6 pin for signal detection. 
3. Able to connect the single modules or multiple modules of the vehicle.  
4. Connect with any diagnostic tool to tell whether the car communication is good or not. 
5. Supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, key remote control fails or the fault light turns on. 
6. One Year Warranty.
7. Work together with Xhorse VVDI2, Autel devices, Launch, Foxwell etc.
8. BMW CAS4 Test Platform function will be coming soon, and also will develop the connection cable for Benz and Chrysler, please wait.