Teste Key:

B102

The BMW ISN reading cable is required to read the BMW ISN number on the bench without the car BMW ISN code is required when programming BMW CAS3+ all keys lost the smart key

Connect the BMW DME ISN reading cable with the BMW ECU and the BMW key programming device, and start BMW ISN reading procedures from BMW DME, BMW ISN reading is done without drilling a hole in DME for the BMW DME boot bin.

How to read BMW MSV80 ISN using the VVDI2 BMW key programmer

• Connect BMW DME with the VVDI2 using the BMW ISN reading cable
• Go to the key learn section in the VVDI2, then select ECU ISN reading
• Select the BMW DME Type you need to read the ISN
• Press Read BMW ECU information
• The VVDI 2 will show you the BMW ECU info
• Press Read BMW DME ISN
• BMW ISN code reading required approximately 8 minutes
• After BMW ISN reading success the VVDI2 will show the DME ISN code
• Save the BMW ISN code to process with the BMW smart key programming

BMW ISN cable-supported DME (ECU)

• BMW MSV80 ISN reading
• BMW MSV801 ISN reading
• BMW MSD80 ISN reading
• BMW MSD81 ISN reading
• BMW MSD802 ISN reading
• BMW MSD812 ISN reading
• BMW MSD851 ISN reading

BMW DME ISN reading cable is compatible with

• Xhorse VVDI 2 programmer
• Xhorse VVDI BMW programmer
• BMW AutoHex III programmer
• CGDI BMW key programmer
• and other BMW DME ISN reading devices

BMW CAS ISN reading supported system:

• BMW CAS3 ISN reading from DME
• BMW CAS3+ ISN reading from DME
• BMW CAS3++ ISN reading from DME
• BMW CAS3+ ISTAP ISN reading from DME

BMW ISN reading cable-supported vehicles:

• BMW E series DME ISN reading 2006-2014
• BMW E90 DME ISN reading 2006-2014
• BMW E92 DME ISN reading 2006-2014
• BMW E60 DME ISN reading 2006-2014
• BMW E87 DME ISN reading 2006-2014
• BMW E89 DME ISN reading 2006-2014

Works with XHORSE VVDI2 or CGDI BMW, read out BMW ISN on bench
Connect the Cable with ECU and device. Don't need drill hole for boot pin.

Feature:

1. LED BDM frame full set, it consists of a acrylic board, Mesh and 4 Probe pens, etc.
   
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED, it will work. The probe pin is adjustable.
   
3. Best bracket for ECU update/ECU brush and write/ECM modified and programming/probe holder/for Dimsport aids.
   
4. It works with for KESS/KTAG/FGTECH/BDM100/100/CMD/DIMSPORT AIDS and othe ECU chip tuning tools.
   
5. Simple designed, easy to use, much better than the old BDM frame.

Case Opend Cover Remover

1. This is a update service for CG FC200, no need shipping.
2. Please send us the CG FC200 serial number after payment.
3. Authorization can be ready in 24 working hours.

Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

CGDI BMW Key Programmer Full Version Highlights of CGDI BMW Full Version:

1. High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 2.
2. Support All 24 Authorizations Free: CAS1-3+ Key Match, CAS4 Key Match, Normal Mode Read ISN, Bootstrapper upgrades, FEM/BDC Key Match, CAS3 Key Match, BMW F Series Program, BMW Enable/Disable Key, BMW F Series Coding, EGS Empty and Clone, CAS Mileage Reset, Porsche 987/911 key learning, 95128/95256 Read and Write, BMW E Series Program, BMW E Series Codification, Maserati Meter Mileage Adjustment, BMW EWS Key Match, BMW Data modification and verification, BMW Diagnosis, ICOM Function, B48 B58 read ISN, CAS4 Key Match(OBD), MSD80/81/85/87/ MSV80 /MSV90 read ISN and N13 / N20 / N55 /B38 Read/Write ISN.
3. Free Update Online, when you receive the device, please download software Here
4. Lifetime Free License, device won't get expired, just renew license online for free when there is no day left.
5. Multi-Languages: English, Spanish, French and Chinese If you need Italian, Polish or Turkish, please pay $130 to activate.
6. With Free Reading 8 Foot Chip Free Clip Adapter and BMW OBD Cable in package

Highlights:

1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

• DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
• Ignition simulated start switch.
• Immobilizer dashboard simulated indicator.
• Key sensing area.
• Screw bolt.
• Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
• Godiag OEM dedicated CAS4 CAS4+ start control adapter. 

GODIAG BMW FEM/BDC Test Platform

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

Highlights:

1. By working together with Godiag GT100, CGDI BMW & CG Pro, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction. 
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access).
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key. When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Display:

• DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
• Ignition simulated start switch.
• Immobilizer dashboard simulated indicator.
• Key sensing area.
• Screw bolt.
• Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
• Godiag OEM dedicated CAS4 CAS4+ start control adapter. 

GODIAG BMW FEM/BDC Test Platform

GODIAG BMW FEM/BDC Test Platform Highlights:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system. 
2. Perform the synchronization test for the programmed FEM / BDC and the key 
3. Provide a test environment for the engineers who professionally recycle FEM/BDC. 
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. 
5. Provide professional engineers with connecting FEM BDC modules and instrument.

CGDI MB Key Programmer Highlights:

• Supports fastest Benz Car key add: collection time 1'50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.
• Work with both BE key and original key
• With new Diode equipped, which makes infrared more sensitive to keyless go key. No need to replace diode chip yourself anymore.

All Key Lost Support List: :

• W164, W216 (2009-)
• W164, W216 (2009-)(Fast)
• W164 (Old), W221 (-2009)
• W164 (Old), W221 (-2009)(Fast)
• W166, W197, W212(Old), W212, W246
• W169
• W169 (Fast)
• W172, W204, W207, W209, W211
• W172, W207, W209, W211(Fast)
• W202, W203, W208, W210, W463, W639 (K)
• W202, W203, W208, W210, W463, W639 (K)(Fast)
• W215 W220
• W230
• W639 (CAN 2009-)
• W639 (CAN 2009-)(Fast)
• W906
• List keeps updating

Support more old Mercedes cars key programming by OBD compared to other Mercedes key programmer like VVDI MB BGA, such as:

• W210, W203, W639, W220,W215, W169
• Mercedes E Series W210 before year 2004
• Mercedes C Series W203 before year 2005
• Mercedes V Series V639 before year 2008
• Mercedes A Series W169 before year 2009
• Mercedes B Series W169 before year 2009
• Mercedes S Series W220 before year 2005
• Mercedes E Series W211 before year 2008

CGDI MB support ECU renew on these models at present:
ME9.7, MED17, CR3.xx, CR4.xx, CR5, CR60.xx, CRD.11, CRD2.xx, , SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LE, SIMELKE
Support Gearbox Renew on EGS 7G

Mileage Repair and Gateway Read/Write Authorization Free (Since March, 2019) and FBS4 Mileage Repair.
Mileage Repair Support Mercedes List:
C(W204) / GLK(X204) / CLK(207) /E(W212) /SLS(197) /CLS(W218) / R-Class(W251) /GL(X164) / ML(W164) / E-Class(W211) / CLS(W219) S-Class(W211) / CL(216) C-Class(W203/ CLK(W209) / SLK(R171), Keep Updating.

Function List:
EIS Function - 

• Support OBD mode and infrared mode to automatically recognize EIS and read data. (FBS3/FBS4)
• Support the identification of SSID and EIS number. (FBS3/FBS4)
• Support to read/modify VIN. (FBS3 and FBS4 only support reading)
• Support reading kilometers. (FBS3/FBS4)5.Support reading KEY track code. (FBS3)
• Support the detection of KEY usage and enabling status. (FBS3/FBS4)
• Support to read the last used KEY position. (FBS3/FBS4)
• Support reading the penultimate use KEY position. (FBS3/FBS4)
• Support detecting EIS status. (FBS3/FBS4)
• Support erasing EIS. (Online online, FBS3)11.Support writing EIS data. (FBS3)
• Support the protection of clearing TP. (FBS3)
• Support disabling EIS. (FBS3/FBS4)
• Support for enabling EIS. (FBS3)
• Support activating EIS. (FBS3)
• Support infrared mode to directly read the KEY password of W215 and a few W209/W211 EIS. (FBS3)
• Support EIS type:
  
  • W164, W251 -2009
  • W164, W251 2009-
  • W166, W197, W212, W218, W246
  • W169, W209, W211
  • W172, W204, W207, W212(ELV)
  • W202, W208, W210(K)
  • W203, W463, W639(K)
  • W215, W220(K)
  • W216
  • W221
  • W230(K)
  • W639 2009-(CAN)
  • W906

Key Read And Write Function:

• Support infrared mode to directly read KEY basic information, including SSID, available times, used times, KEY location, KEY status, KEY version.
• Support BE KEY infrared mode to directly read KEY password, erase, write new KEY data and activate.
• Support KEY write data with 21DF status.
• Support reading/activating the new BGA KEY.
• Support KEY hopping code repair.
• Support smart KEY (08/09) and non-smart KEY (40/51/57).
• Only support reset KEY chip type:
  00043650 chip
  00040582 chip
• Types of KEY chips that support reading, writing and resetting:
  00040229 chip
  567897041 chip
  567897051 chip
  567897061 chip
  567897071 chip
  567897081 chip
• Support CGMB KEY frequency switching, 433Mhz/315Mhz, resistance control arbitrary switching.

Password Calculation Function (Online):

• Support for having car keys and keyless (all lost) calculation passwords, of which all lost support normal collection and fast collection.
• To calculate the password, you first need to collect data, which takes about 3 minutes with the car key.
• In 99% of cases, the password is calculated at one time, and the time is about one minute.
• If there is a car key, calculate the EIS type supported by the password:
• Mercedes-Benz A series after 2004
• Mercedes-Benz B series after 2005
• Mercedes-Benz C series after 2001 (including W210)
• Mercedes-Benz E series after 2001 (including W203)
• Mercedes-Benz CL series after 2001
• Mercedes-Benz GLK series after 2004
• Mercedes-Benz ML series after 2003
• Mercedes-Benz R series after 2003
• Mercedes-Benz G series after 2003
• Mercedes-Benz S series after 2001 (including 220)
• Mercedes-Benz SLK series after 2003
• Mercedes-Benz SLS series after 2004
• Mercedes-Benz Vito series after 2003
• Mercedes-Benz Sprinter series after 2003
• If there is no car key, calculate the EIS type supported by the password:
• W164, W216(2009-)
• W164, W221(-2009)
• W166, W197, W212(old), W212, W246
• W169
• W172, W204, W207, W209, W211
• W202, W203, W208, W210, W463, W639(K)
• W215, W220
• W230
• W639(CAN)
• W906
• In the absence of a car key, some EIS support quick collection, the types are as follows:
• W164, W251 2009-
• W164, W251 -2009
• W169
• W172, W207, W209, W211
• W202, W203, W208, W210, W463, W639(K)
• W216
• W221
• W639 2009-(CAN)

Generate Key Data Function (Online):

• Load EIS data to generate KEY data.
• The time to generate KEY data is about 10 seconds.
• Support generating KEY data of HC05/908/912/9S12/NEC type EIS.

ECU/TCU/ISM Programming Function:
ECU: Automobile electronic control unit, also known as trip computer.
TCU: Automobile gearbox computer.
ISM: Car gear computer, also known as DSM and ESM.

• Support reading data of ECU/TCU/ISM.
• Support the erasing of ECU/TCU/ISM. (online)
• Support ECU/TCU/ISM data loading and saving.

ELV Function:
ELV: Car steering lock, also known as ESL.

• Support OBD mode to read ELV data directly. (Clamp on the ELV K line with a small yellow clip)
• Support to erase ELV. (Online)
• Support direct write direction lock data. (Online)
• Support for synchronizing ELV data.
• Support checking ELV damage.
• Support for activating ELV.
• Support to repair ELV.
• Support ELV type:
  W209, W211
  W204, W207, W212
  W169
  W639(NEC)
  W906
• Support W204/W207/W212 ELV simulator function

Car Mileage Repair Function:

• Support to read the internal data of the instrument, including serial number and mileage.
• Support for writing mileage information.
• Support to clear the fault code of the instrument.
• Support EEPROM reading and writing of the instrument.
• The supported instrument types are as follows:
• C-CLASS/CLK-CLASS: W203, W204, W205 (2014-2017), W209
• CLS-CLASS: W218, W219
• E-CLASS: W207, W211, W212
• GL-CLASS: X164
• GLK-CLASS: X204
• M-CLASS: W164
• R-CLASS: W251
• S-CLASS/CL-CLASS: W221, W222 (2013-2016)
• SL-CLASS/SLK-CLASS: R171
• SLS-CLASS: W197
• VITO/VIANO: W447(2014-2017)

ZGW Data Read And Write Function:
ZGW: Automotive Gateway

• Support ZGW's EEPROM/FLASH read and write.
• The types of ZGW supported are as follows:
• C-CLASS: W204
• E-CLASS: W211, W212
• M-CLASS: W164
• R-CLASS: W251
• S-CLASS: W221
• CLK-CLASS: X204, W207
• CLS-CLASS: W218
• SLK-CLASS: R171
• GL-CLASS: X164
• CL-CLASS: W216
• SLS-CLASS: W197

Functions of the Adapters:

EIS/ELV Test Line for Mercedes (without Having to Get on the Car)

Mercedes Locks Platform Test Line for W204 W212 W221 W164 W166 W205 W222

Scope of Applicationa:

The EIS ELV maintenance
Key programmer
Detection key

ELV Repair Adapter for CGDI MB Benz Key Programmer:

• Automatically forced clearing contents
• Enable ELV,Get out of suspended anim ation
• Virgin,Solve accidental errors
• Test Write ELV,Determine if it is working properly
• W204 W207 W212 W209 W906 Reparing locked chip

CGDI ELV Simulator Renew ESL for Benz 204 207 212 with CGDI MB Benz Key Programmer:

CGDI MB ELV Emulator is newly released adapter by CGDI Company, which can Renew ESL for Benz 204 207 212, work with CGDI MB Benz key programmer, can do the same function with Xhorse ELV Emulator with cheaper price.

Most W204 W207 W212 ESL will damage with EIS. In this case, there are two possible reasons and solution:
ESL motor is damaged and need to replace a new motor
NEC chip is locked, theoretically it can be unlock, actually it needs to replace new ESL.

CGDI MB AC Adapter Features:
Acquire data via OBD at a quick speed
No need to dismantle EIS
No need to plug and insert the cable
Save much data acquisition time

CGDI MB AC Adapter Workable Models and the Data Acquisition Time:

Mercedes Benz S series
Chassis W221 EIS model 216 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz E series
Chassis W221 EIS model 211 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz C series
Chassis W209 EIS model 209 free of disassembly,free of plugging in and out,acquisition time of 9 minutes

Mercedes Benz B series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz A series
Chassis W246 EIS model 169 free of disassembly,free of plugging in and out,acquisition time of 35 minutes

Mercedes Benz R series
Chassis W251 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz ML series
Chassis W164 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

Mercedes Benz GL series
Chassis W166 EIS model 164905 free of disassembly,free of plugging in and out,acquisition time of 12 minutes

• Language: English, Spanish, French, German and Chinese
•  

CGDI MB Prog Package List:
1pc x CGDI MB Multiplexer
1x AC Adapter
1x EIS Test Line
1x ELV Adapter
1x ELV Simulator