Xhorse Remote Tester Radio Frequency (FR) Infrared (IR) can detect frequency as well as infrared working or not. This one not support 868MHZ.

Does not include battery.

Xhorse VVDI Prog Adapter Set for Benz EIS/EZS - 10 PCS With this collection of 10 adapters from Xhorse, you will now be able to read the Bin File/Dump from the EIS/EZS Modules listed below without soldering a single wire to the Module. This lack of soldering simplifies and speeds up the process while making the reading safer. These adapters are used in conjunction with the VVDI PROG as a complete solution for Bin File/Dump reading on the referenced EIS/EZS Modules. Once you have the Bin File/Dump read out, save the file. You can then present that saved file to the VVDI MB BGA Tool or any other capable tool and program a key to the vehicle. Package includes:

• 1pc x for W164(ST12)
• 1pc x for W169(ST12)
• 1pc x for W203(HC08)
• 1pc x for W209/211(ZWG)
• 1pc x for W209/211(HC12)
• 1pc x for W211(ST12)
• 1pc x for W215/220/230
• 1pc x for W639(HC08)
• 1pc x for SPRINTER(ST12)
• 1pc x for VITO W639(ST12)

10 Pcs - VVDI Prog EZS Adapters for Mercedes

• Don't need to solder
• Read data perfectly
• Can be external power to light when working
• Easy to operate, transparent material – better to observe

This is a pack of 5 Mini ELV Emulators for Mercedes Benz W204 W207 W212

Can be used as a replacement for the larger Original ELV / ESL emulator at a cheaper price and smaller form factor. A little under 2" it is 5 x smaller than the original which makes it easier to work with

Supports all Benz vehicles equipped with W204 / W207 / W212 directional lock.

Supports direct exchange of the directional lock in the position of the original car.

Emulate the ELV sound of the Original Vehicle

For use with the VVDI MB Key Programmer

The EEPROM Clip Adapter Use appropriate CLIP CABLE to clip to the chip ensure reliable electrical connection. Some circuit boards need use the PROBE

• No Soldering Required
• SOP8 Clip Cable
• DIP8 Clip Cable
• Probe
• EEPROM Clip Adapter

Specs:

Manufacturer: Xhorse
Condition: New
Color: Green

Xhorse VVDI Prog EEPROM Clip adapter overview:

The Xhorse VVDI Prog EEPROM Clip adapter XDPG12 support in-circuit chip read & write for SOP8 / DIP8 Eeprom

Xhorse VVDI Prog EEPROM Clip adapter set supported EEPROM :

• Xhorse VVDI Prog 24Cxx read/write
• Xhorse VVDI Prog 25xxx read/write
• Xhorse VVDI Prog 93Cx6 read/write
• Xhorse VVDI Prog 93Sx6 read/write
• Xhorse VVDI Prog 95xxx read/write
• Xhorse VVDI Prog S29x90 read/write
• Xhorse VVDI Prog ST95P0x read/write
• etc...

Xhorse VVDI Prog EEPROM adapter set XDPG12 contains:

• Xhorse VVDI Prog EEPROM Clip Adapter
• Xhorse VVDI Prog sop8 Clip Cable
• Xhorse VVDI Prog DIP8 Clip Cable
• Xhorse VVDI Prog EEPROM Probe
•  

Package includes:

EEPROM Adapter - SOP8 Clip Cable - DIP8 Clip Cable - Probe
In circuit Read/Write EEPROM chip of SOP8/DIP8 package.

Support Type:

24CXX - 25XXX - 93CX6 - 93SX6 - 95XXX - S29X90 - ST95P0X etc ...

2023 Xhorse MINI OBD TOOL FT-OBD for Toyota Smart Key Support Add Key and All Key Lost

Xhorse MINI OBD tool FT-OBD (For Toyota) version supports over 95% of Toyota smart key adding keys and all keys lost operations.

Xhorse MINI OBD TOOL FT-OBD for Toyota Highlights:

1. 95% Coverage
2. Remote and IMMO Programming
3. Wireless Connection: MINI OBD TOOL can connect with specific software or hardware by WIFI, WLAN or USB interface.
4. Easy to Use: Support work with both Xhorse APP and Key Tool Max.
5. Compact Body

Support List:

Granvia, Land Cruiser, Kluger, Prado, Alphard, Previa HV, Tarago, Vellfire, Prius, Fortuner, Prius C, Hilux Sw4, Prius C2, Corolla EX, Prius PHV, Crown, Prius +, Highlander, Prius V, Highlander HV, Previa, Hilux, Rav4, Hiace, Rav4 HV, Sequoia, Rav4 E+, Camry, Reize, Corolla, Sienna, Corolla Cross, Sienna HV, Avanza, Harrier, Tank, Harrier HV, Tundra, Levin, Vios, Vios FS, GAIA, Wildlander, IA, Venza, iM, Yaris, Ipsum, EZ, iQ, Avalon, Matrix, Allion, Mirai, IZOA ,OPA, Zelas, Raum, YARiS L, Rav4, Prime, Aqua, Rukus, Aristo, Rush, Auris, Sienna, BB, Solara, bZ4X, Tacoma, Comfort, TC, C-HR, XB, Land Cruiser, XD, FJ Cruiser, Yaris GR, Frontlander, 4Runner, FR-S, 86

Highlights:

1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily. 
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Ben Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Add Vehicle Engine Data Calculation and Processing (MED17, EDC17 etc)
4. Support Checksum Function
5. Newest Software Version: V1.0.9, Hardware Version: V1.1.5

Xhorse Multi-Prog Free Software Download

Xhorse Multi-Prog Functions:

1. Read, Write and Clone ECU
BMW B48/B58 reading ISN 
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
VW BOSCH MED17 Series ECU 
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
With Free MQB48 License. Bind Multi-prog and VVDI2 full version to the same Xhorse app account to use MQB48 NEC35XX function
Also Compatiable with Xhorse MQB Solder-free Adapters

2. Read, Write and Clone TCU
Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU

3. Vehicle Engine Data Calculation and Processing
MEDl 7/EDC17 data processing

4. Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services

5. Read & Write MCU
Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
Support certain encrypted chip reading and writing

6. Read & Write Vehicle Immo Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,
VW MQB dashboard, AUDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules
Note:Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM
Support EEPROM and FLASH

8. Read & Write Vehicle Dashboard
Support dashboard of VW, Honda, Hyundai, Kia, etc.

Xhorse Multi-Prog ECU and TCU List: (Keep Updating)

ECU (Bench Mode):

VAG 
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MG1CA811
3. BOSCH: MED17.1.6, MED17.1.21, MED17.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED1 7.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
4. BOSCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01, EDC17U05
5. BOSCH: MG1CS002一SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777, MG1CS002_TC298TP, MD1 CP004_TC298TP, MD1 CP004一SPC5777, MG1 CS111 一SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
6. CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90 
2. BOSCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP (B38, B48, B58), MD1CS001_TC298TP, MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
3. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
4. BOSCH: MEI 7.2.1
5. BOSCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K 
6. OSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz
1. CONTINENTAL: SIM271 DE, SIM271 KE
2. BOSCH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. BOSCH: CRD3x.x_TC1793, CRD3x.x_TC1 797
5. BOSCH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1CS006_TC298TP

GM
1. DELPHI: DCM3.7AP
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Nissan
1. DENSO: 23740-3Nxxx_Gen1 SH72531
2. BOSCH:EDC17C84

Hyundai/Kia
1. BOSCH: ME17.9.11, MEI 7.9.11.1
2. BOSCH:EDC17C53
3. BOSCH: MEG17.9.1 2_ECU

Ford
1. BOSCH: EDC17C70, EDC17CP65
2. BOSCH: ME17.0.3, ME17.8.5

Volvo
BOSCH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22

Other
1. AM_ME1 7.8.5,DOO_ME17.8.5
2. BOSCH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767, ME1 7.8.31, ME1 7.9.52
3. BOSCH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14, EDC17c81
4. BOSCH: MEVD1 7.8.4
5. BOSCH: MED17.8.1 0_TC1 728, MED17.8.1 0_TC1 728_Hw2, MED1 7.8.1 0_TC1 767
6. BOSCH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1CS163, MD1CS01 2, MD1CS089, MD1CS069, MD1CS005_TC298TP, MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP, MG1CS01 7_TC277TP, MG1CS01 8, MG1CS019, MG1CS088
7. CONTINENTAL: SID208, SID209, SID211, SID807EVO ⑧ DENSO: KH, ZY, SH70xx_275xxx-xxx

ECU (Boot Mode):

VW series
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MED17.1.6, MED17.1.21, MED1 7.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED17.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
3. BOSCH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01, EDC17U05
4. BOSCH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

BMW series
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
3. BOSCH: ME1 7.2.1
4. BOSCH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G(N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
5. BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes Benz series
1. CONTINENTAL: SIM271 DE,SIM271 KE
2. BOSCH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. DELPHI: CRD2.x_MPC556x

Nissan series
BOSCH: EDC17C84

GM series
1. DELPHI: MT80.MT80.1
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Hyundai/Kia series
1. DELPHI: MT86
2. DELCO: DCM6.2AP

Other
1. CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
2. SDI21.1 ,SDI21.2,SDI21.3
3. BOSCH: ME1 7.3.0
4. MARELLI: 8DF, MM10JA

TCU (Bench Mode):

VW
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx, DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250

Exx/Fxx BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2

Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT

Ford series
1. ETRAG MPS6GETRAG
2. DPS6, DC4

TCU (Boot Mode)

Ford series
DPS6, DC4

Other
ZF 9HP

Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
43pcs x ECU Cable Plugs
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity 

Xhorse XDRT20 Remote Tester V2 for 315Mhz 433Mhz 868Mhz 902Mhz

Main functions:

1. Frequency detection, supporting 315Mhz, 433Mhz, 868Mhz, 902Mhz and other major frequency bands
2. IMMO signal, doorknob signal detection
3. Infrared signal detection

Intelligent power-saving, longer battery life, magnetic suction function, more convenient to use, exquisite and small, easier to carry

Features:

• Generate remotes and smart keys
• Program immobilizer via Mini OBD Tool (not included)
• Reset check engine light and performance tune ECM via Mini OBD Tool (not included)
• Unlock remotes utilizing the original Key Tool’s jig sets (not included)
• Read and copy access control cards
• Generate and copy garage remotes
• Remote frequency detection
• Direct connection to Condor Dolphin
• Immobilizer detection directly at the ignition coil

The underlying goal here is to provide you a single platform that will guide you through creating a functional key and get it programmed to the vehicle.

Step 1: Read the vehicle data (VIN & immobilizer) via OBD utilizing the soon-to-be released Mini OBD Tool.

Step 2: View the remote and transponder chip information for the vehicle you’re plugged into and instantly generate your chip and key.

Step 3: View the proper keyway for cutting on the Dolphin and cut your blade (once you’ve Lishi’d to determine your cuts).

Step 4: Take your completed key back to the vehicle for immobilizer programming.

Step 5: Profit!

This is truly a one-of-a-kind, comprehensive key-generating platform from some of the most innovative minds in our industry. Future updates will include the ability to run vehicle diagnostics, kill check engine lights, adjust TPMS systems, performance tune engines and much, much more.

Includes:

(1) VVDI Key Tool Max tablet

(1) USB-C cable (for charging)

(1) Remote generation cable (for wired remotes)

IMPORTANT NOTES*

VVDI MB BGA Mercedes Key Programmer Features:

• Supports BE key, read password and prepare new key via IR
• NEC V051,V057 supports password retrieval on-board (no EEPROM needed)
• On-board writing and erasing to all NEC keys (no EEPROM needed)
• Fast password calculations for BGA and NEC keys (include 51,57 version)
• Writes & renews EIS (EZS) and ELV (ESL)
• Generates key file (must have Internet access)
• Unlocks ELV (ESL)

Connect your VVDI to your customer's vehicle and the software will auto-detect the chassis. It is also printed on the EIS module.

These are the various chassis supported:

• W164, W164 2009+
• A166, W197,W212, W218, A246
• A169, W209, W211
• W172, W204, A207
• W203
• W204, W207, W212 by dump
• NEW!—W204, W207 via infrared ALL KEYS LOST option
• W209 (only by dump)
• W210
• W215, W220
• W230
• W216
• W221
• W906

VVDI Benz BGA Tool Package List:

• VVDI-MB TOOL device
• IR adaptor
• USB cable
• NEC adaptor 1
• NEC adaptor 2
• NEC adaptor base PCB
• K-Line in OBD line
• OBD line
• Plastic Box
• Carton Box

Tokens are needed when calculating a Key Password. All other online calculations are free and do not require the use of a token

FEATURES:

VVDI Mini key tool can generate and copy the remote & chip by working together with the mobile phone. Support normal ID48 transponder. Support list (parts of example): Volkswagen, Honda, Cadillac, Fiat, Volvo,Greatwall, Zhonghua etc.

INCLUDING:

Programmer multiplexer

Square USB cable

SOP16 test socket

16pin converter

MCU reflash cable

ECU reflash cable

MC9S12 reflash cable

12V3A power adapter

It supports the following functions:

• OBD function for VW, Audi, Skoda, Porsche, BMW , Seat, Bentley
• Supports BMW CAS1, CAS2, CAS3 by OBD and CAS4 by Eeprom
• AUDI Generation 5, BMW OBD Function and BMW CAS4+ Functions
• Transponder chip programming - Read/Write/Copy/Verify
• Immobilizer Data Tool and Remote Programming
• Support of third-party software (ODIS, VAS5054, Techstream, HDS)
• Auto detect transponder and Remote frequency test
• Online firmware and software update (Free Lifetime Updates)
• 8 month Xhorse warranty

Includes

• VVDI2 Base Unit
• OBD2 Cable with K-Line Connector
• USB Data Cable
• 5th BDM Programming Cable
• Remote Programming Cable

Includes the Following Software:

NOTE: We suggest you create a folder on your desktop, exclude it in Windows Defender and put the files inside it. This way windows defender does not delete anything. You will have to extract the files and run them from there. The software is portable and doesn’t install on the PC.