This is a 3 Piece Adapter set for reading BMW MEVD17.2.x data 

Using these adapters, you can connect to the DME on the bench. With the Autel IM608 programmer tool and the Autel G BOX2, read the DME ISN(no need to open the DME) or clone the DME.

 If you are a locksmith, this is useful when performing All Keys Lost. You don't have to spend time removing the DME from the vehicle. You just need to pull out the original DME female connector and insert the adapter into the DME to get the ISN through the Autel G BOX2  and Autel IM608

Includes:

• BMW MEVD17.2.x  N13 & N20 DME Adapter
• BMW MEVD17.2.x  BM38 DME Adapter
• BMW MEVD17.2.x  N55 DME Adapter

for Autel GBOX2 and IM Tools

Autel Nissan 16+32 Secure Gateway Adaptor for IM608 Pro and IM508

• Autel APB112 Smart Key Emulator
• Supports 46, 4D Data Collection
• Supports 46 Smart Key Password Calculation
• Supports 46 Chip Emulation
• Supports Toyota4D (94/D4, 98) Smart Key Emulation
• Supports Toyota H (88/A8, A9, 30) Smart Key Emulation

The CAN FD Adapter from Autel is designed to connect to compatible vehicle communication interfaces (VCIs) to enable its tablets to communicate via the CAN FD (flexible data-rate) communications protocol and diagnose the vehicle. Vehicles currently using the CAN FD  protocol include many General Motors and Ford 2019 and 2020 vehicles. Autel's MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908S, MS908P, MS908SP, MSELITE, IM508, and IM608 tablets will be able to diagnose CAN-FD equipped vehicles when the adapter is plugged into the VCI directly as in the case of the smaller VCI units or into the OBD-II cable that is connected to the larger VCIs and into the vehicle's OBD-II port.

• Autel G-BOX3 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

• Powerful Cortex-A9 processor
• 7”1024x600 LCD capacitive touchscreen
• Internal reliable 32GB Memory
• Android Operating System for fast boot-up and multitasking
• Powerful combination of key programming/all system diagnostics/advanced maintenance services
• Smart Mode for guided and automated key learning
• Expert Mode for advanced key learning
• Read PIN/CS (all key lost) , key generation, key learning, remote learning
• IMMO ECU reset/adaptation, refresh/coding
• Transpronder read/write, EEPROM/MCU read/write
• Powerful OE level diagnostics for more than 80 US, Asian and European makes and models
• Advanced maintenance services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn

Features

• Samsung Exynos 5260(2GB ROM)
• 10.1”1024x768 LCD capacitive touchscreen
• Internal reliable 64GB Memory
• Android Operating System for fast boot-up and multitasking
• Powerful combination of key programming/all system diagnostics/advanced maintenance services
• Smart Mode for guided and automated key learning
• Expert Mode for advanced key learning
• Read PIN/CS (all key lost) , key generation, key learning, remote learning
• IMMO ECU reset/adaptation, refresh/coding
• Transpronder read/write, EEPROM/MCU read/write
• Powerful OE level diagnostics for more than 80 US, Asian and European makes and models 
• Advanced maintenance services including EPB, DPF, SAS, Oil reset, and BMS

Autel MaxiIM IM608 IMMO Vehicle List:

Audi: A1, A3, A4, A5, A6, RS4, B6, B7, RS5, RS6, A4 Allroad, A8, S8, Q3, RSQ3, Q5, Q7, R8, TT
Seat: Alhambra, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo
Skoda: Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti
VW: Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!/cross UP!
Fiat: 500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio

OE- Level Diagnostic For 80+ Vehicle Makes

Compatible with over 80 US, Asian, and European vehicles, the Autel IM608 goes far beyond communicating with all systems to access all available modules:

• Exceptional OE-Level system coverage for all electronic systems;
  
• Active Test for getting access to specific subsystems and performing component tests to drive the actuator so as to determine the integrity of the system or parts;
  
• Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc.;
  
• Smart AutoVIN technology for identifying vehicles easily;
  
• Automatic system and software updates with real-time push message notifications via Wi-Fi;
  
• Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes;
  
• Instant remote control tech support anytime, anywhere.

Functions:

ADVANCED IMMO & KEY PROGRAMMING

Connect the IM608 tablet to the vehicle (via the Bluetooth VCI or Main Cable) and to the XP400 (via USB cable) to access IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. The software provides two methods to access IMMO functions.

• Smart Mode – for Guided and Automated Key Learning - automatically identify the type of anti-theft system, intelligently combining the matching process. Easy to use. You only need to operate according to the device prompts to perform relevant operations. A novice user can also perform Key Learning.
• Expert Mode – for Advanced Key Learning - meet the needs of professional technicians. It is more powerful for its advanced key learning functions

1. PIN / CS Reading (Full Lost)
   
2. Key Generation
   
3. Key Programming
   
4. Command Introduction
   
5. Backup / Repair IMMO Data
   
6. IMMO ECU Brain Reset / Adaptation
   
7. IMMO ECU Brain Reset / Coding
   
8. BENZ 3rd Generation IMMO Key Splicing, Full Lost, Key Programming
   
9. BMW FEM / BDC Key Programming and ECU Adaptation
   
10. BMW CAS4 / 3/2 Key Programming
    
11. VW / AUDI MQB Key Programming, 48 Transponder (96-bit) Key Splicing, Full Lost, A6 Full Lost and More ...

Professional Vehicle Locksmith

The Key Programmer XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool or PC those are both loaded with programmer software, the XP400 can read/write transponder data quickly and accurately. The XP400 include 9 parts:

• Transponder Induction Area – Remote control
  
• Transponder Slot – Hold the transponder
  
• Mercedes Infrared Key Slot – Hold the Mercedes infrared key
  
• Vehicle Key Slot – Hold the vehicle key
  
• IC Card Induction Area – Read/write IC card information
  
• Status LED – Indicate current operating status
  
• Cross Signal Pins – Hold the MCU board, MCU spare cable or DIY signal interface
  
• EEPROM Component Transponder Slot – Hold the EEPROM plug-in transponder or EEPROM socket
  
• Locker – Lock the EEPROM component transponder slot to ensure proper function

Note: You can connect it to the XP400 (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions.

All-in-One Key & Chip Programmer XP400 Pro

Connect the IM608 Pro tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions. The XP400 includes 12 ports:

1. DC Port – provides 12V DC power supply.
   
2. USB Port – provides data communication and 5V DC power supply.
   
3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
   
4. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.
   
5. IC Card Induction Area.
   
6. Vehicle Key Slot – holds the vehicle key.
   
7. Transponder Slot – holds the transponder.
   
8. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 11
   
9. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
   
10. Status LED – indicates the current operating status.
    
11. Locker – locks the EEPROM component transponder slot to ensure proper functioning.
12. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.

XP400 Key SWITCH & CHIP PROGRAMMER

1. PC Supported
   
2. MCU / EEPROM Chip Read / Write
   
3. ECU Read / Write
   
4. MC9S12 Encrypted Chip Read / Write
   
5. Key Reading / Writing
   
6. Mercedes Infrared Key Reading / Writing
   
7. Finding the Control Frequency
   
8. IC Card Reading / Writing

All System Diagnostics - Access to OE-Level Diagnostics

This OE-Level diagnostic tool allows you to perform the same level of analysis, diagnosis and repair as the OEM dealer’s tool does, which means, as a professional mechanic, you now have full access to all of the diagnostic information as the same exact tool that of the OEM dealer offers, and the ability to complete reflashing or reprogramming without outsourcing or turning a client away. Also, this access to information will be a substantial improvement for independent repair shops

1. All System Diagnostics
   
2. Auto Search / VIN Finding
   
3. Reading / Deleting Error Code
   
4. Viewing the Live Data Stream
   
5. View Records of Failure History
   
6. Store and Data Management Applications
   
7. MaxiFlash JVCI ECU Programmer (Bluetooth / USB Cable)

Auto Scan & Auto VIN for Added Convenience

Adopting the latest VIN-based technology, Autel IM608 comes with Auto VIN feature to acquire the vehicle VIN number automatically and Auto Scan feature can quickly scan all modules present to quickly locate the fault cause at one touch.
The AutoVIN Scan technology of the IM608 enables you to identify CAN vehicles fast and precisely in one touch. With this advanced function, you can easily and quickly retrieve car's information, including the vehicle type, country of origin, engine size, etc. and run diagnostics on selected system.

ECU Coding

The Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the
vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or
replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.

Active Test

The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time. 

Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

Autel MaxiIM IM608 II is the newest all-in-one OBD diagnostic tool this year, combining full IMMO and programming function coverage, all system diagnostics, 36+ maintenance functions, ECU coding and ECU online programming (J2534 JVCI compatible) and more. It functions exactly the same as Autel MK908P II or MaxiSYS MS908S Pro II. 

Main Configuration Updates Based on Autel IM608 Pro:

• Operating system move on to Android 10 from Android 4.4.
• Upgraded 8-core Qualcomm SDM660 8-Core Processor replacing old Exynos T5260 6-Core Processor.
• Doubled RAM & ROM: 4GB/128GB; SD card support up to 64GB (IM608 Pro support max 32GB)
• 16MP Rear camera replacing the previous 8MP one.
• Optimazed newest Software version & More Intuitive Interface.

Autel MaxiIM IM608 II Features

• No IP Limitation: You Can Use it All Around the World without Limitation
• One Year Free Update Online (After One Year, IM608 II Software Subscription Cost $850/Year)
• Upgraded Version of Autel IM608 and IM608 PRO, with the latest powerful hardware configuration
• Smart Mode and Expert Mode Solution In One Tool to Easy Operation with Ambient Light Sensor – detects ambient brightness.
• Support Multi-Language: Both Diagnose Software and IMMO Software Support Multi-Language. (Default Language is English, Can Be Changed Language to German, Swidish, Italian, Portuguese, French, etc.)
• Works for 85% Cars In The Wordwide, Include BMW, BENZ, VW, AUDI etc. make your work simple and easier, Best Choice for Locksmith and Workshop
• Extended to Work with Autel MV108/ MV105 allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure safely and quickly.

Autel MaxiIM IM608 II Top Highlights

Upgraded from IM608/IM608PRO, the IMMO & key fob programming tool IM608 II can also read the immobilizer pin codes and password directly from the vehicle and store the information to do key learning for the newly programmed keys. The professional key fob programming tool Autel IM608 II has covered almost all the key programming functions:

• Auto Detect Make/Model/Year/System
• Read PIN (All Key Lost), Key Learning
• IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding
• VW MQB Key Learning, Mercedes Key Learning
• B~MW FEM/BDC Key Learning and Adaption, Programming and Coding functions for lMMO related systems: DME,JBE,FRM,CAS, KOMBI,EGS, GwS,ZGW, ELV and FZD
• B~MW CAS4 Key Learning and Adaption
• Mercedes-Benz: Coding SCN for lMMO related systems;DAS, ECU, TCU, ISM and ESL
• 2015-2018 Land Rover & Jaguar write key via dump
• Volvo Smart Key Learning/knob-style smart key

Expanded adapter set for the IM608 II with the XP400PRO:

• Supports over 10 key unlock types
• BMW EWS3 key learning
• Benz NEC key learning
• Benz ESL_W209 read/write/erase

Autel MaxiIM IM608 II is the newest all-in-one OBD diagnostic tool this year, combining full IMMO and programming function coverage, all system diagnostics, 36+ maintenance functions, ECU coding and ECU online programming (J2534 JVCI compatible) and more. It functions exactly the same as Autel MK908P II or MaxiSYS MS908S Pro II. 

Main Configuration Updates Based on Autel IM608 Pro:

• Operating system move on to Android 10 from Android 4.4.
• Upgraded 8-core Qualcomm SDM660 8-Core Processor replacing old Exynos T5260 6-Core Processor.
• Doubled RAM & ROM: 4GB/128GB; SD card support up to 64GB (IM608 Pro support max 32GB)
• 16MP Rear camera replacing the previous 8MP one.
• Optimazed newest Software version & More Intuitive Interface.

Autel MaxiIM IM608 II Features

• No IP Limitation: You Can Use it All Around the World without Limitation
• One Year Free Update Online (After One Year, IM608 II Software Subscription Cost $850/Year)
• Upgraded Version of Autel IM608 and IM608 PRO, with the latest powerful hardware configuration
• Smart Mode and Expert Mode Solution In One Tool to Easy Operation with Ambient Light Sensor – detects ambient brightness.
• Support Multi-Language: Both Diagnose Software and IMMO Software Support Multi-Language. (Default Language is English, Can Be Changed Language to German, Swidish, Italian, Portuguese, French, etc.)
• Works for 85% Cars In The Wordwide, Include BMW, BENZ, VW, AUDI etc. make your work simple and easier, Best Choice for Locksmith and Workshop
• Extended to Work with Autel MV108/ MV105 allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure safely and quickly.

Autel MaxiIM IM608 II Top Highlights

Upgraded from IM608/IM608PRO, the IMMO & key fob programming tool IM608 II can also read the immobilizer pin codes and password directly from the vehicle and store the information to do key learning for the newly programmed keys. The professional key fob programming tool Autel IM608 II has covered almost all the key programming functions:

• Auto Detect Make/Model/Year/System
• Read PIN (All Key Lost), Key Learning
• IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding
• VW MQB Key Learning, Mercedes Key Learning
• B~MW FEM/BDC Key Learning and Adaption, Programming and Coding functions for lMMO related systems: DME,JBE,FRM,CAS, KOMBI,EGS, GwS,ZGW, ELV and FZD
• B~MW CAS4 Key Learning and Adaption
• Mercedes-Benz: Coding SCN for lMMO related systems;DAS, ECU, TCU, ISM and ESL
• 2015-2018 Land Rover & Jaguar write key via dump
• Volvo Smart Key Learning/knob-style smart key

Expanded adapter set for the IM608 II with the XP400PRO:

• Supports over 10 key unlock types
• BMW EWS3 key learning
• Benz NEC key learning
• Benz ESL_W209 read/write/erase

Autel - MaxiIM IMKPA

This Expanded adapter set for the IM608/IM508 with the XP400PRO Autel key programmers

• Supports over 10 key unlock types
  
• BMW EWS3 key learning
  
• Benz NEC key learning
  
• Benz ESL_W209 read/write/erase
  
• Compatible with IM508 and IM608 Autel key programmers (XP400Pro required)

Autel - APB 112

• Autel APB112 Smart Key Emulator
• Supports 46, 4D Data Collection
• Supports 46 Smart Key Password Calculation
• Supports 46 Chip Emulation
• Supports Toyota4D (94/D4, 98) Smart Key Emulation
• Supports Toyota H (88/A8, A9, 30) Smart Key Emulation

Autel - G-BOX2

• Autel G-BOX2 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

• Extraordinarily powerful Cortex A7+A15 six-core processor
• 9.7” 2048x1536 LED-backlit glossy Multi-Touch capacitive display with IPS technology
• Internal reliable 64GB On-board Memory for better performance
• Built-in 8-megapixel rear camera with autofocus and flashlight
• The VCI connects to the main unit wirelessly with up to 70 meters working range
• 802.11 a/b/g/n/ac Wi-Fi to access your favorite web resources
• Unique ergonomic design with rubberized outer protection and a rugged internal housing
• Open source Android Operating System for fast boot-up and multitasking
• Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
• Exceptional OE-Level system coverage for all electronic systems
• Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc
• Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
• Built-in rechargeable lithium-polymer battery for up to 7.5 hours of continuous operation
• Equip with J2534 ECU Programming Device for replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues