Filters
Filters
Clear allWith this tool it is possible to force the ignition (Pin 15 in Vag vehicles from the OBD2 port). This allows you to activate the vehicle's control units and establish OBD2 communication without having an ignition key. It has a male OBD2 port on one end and a female OBD2 port on the other end that allows diagnostic equipment to be connected to this connector, the K-LINE, L-LINE and CAN connections pass through the device and there will be communication to the vehicle. The connector has a power switch / a LED indicates when the connector is in operation, to confirm the power-on status.
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
CG FC200 ECU Programmer Full Version
FC200 Highlights:
-
Protect Original Car Parts
More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car. -
Intelligent Recognition
The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out. -
Module Clone
Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules. -
ISN Read and Write
Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.
Check FC200 BMW ISN Read and Write List -
VIN modification
Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance. -
Data Processing
Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;
Support the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;
Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series. -
FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.
Check FC200 Support ECU List - For Checksum Function, Please Check FC200 Support Checksum List for Reference.
- There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode
-
Multi-Language: English, French and Simplified Chinese
For Spanish, Polish Turkish and Traditional Chinese, will need to pay $130 to get authorized seperately with serial number. - Full Version with All License Activated.
Free Update Online for One Year. Annual Fee will be $250/year after the first year. -
With New Adapters Set No Need Disassembly in Package:
Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.
(With this adapter set, you won't need the old B48/B58 cable anymore).
FC200 Latest Update Information:
V1.0.7.0 Registered Version NEW (2022.06.28)
- Added Bosch ST10 series engine boot modes: M7.9.7, ME7.9.71, ME7.9.7, ME7.4.5, ME7.9.9, MED7.6.1, MSE3
- Added Hyundai and Kia KEFICO series engine boot modes: CPEGD2.20.1, CPEGD2.20.2, CPEGD2.20.3, CPEGD2.20.4
- Added Delphi engine boot mode: CRD2.x MPC5566
- New Bosch boot mode engines: ME17.9.23, MED17.7.5, ME17.9.7, M17.8.7, MED17.8.2, EDC17CP65, ME17.8.5
- Newly added engines to modify the VIN function: EDC17C63, EDC17CV44, MED17.1.1, MED17.8.2, MEDG17.0
- Modify the VIN function and add the function of forcing a new VIN to be written
- Fix some bugs and optimize software performance
Functions of Each Adapter:
- MSV90 Adapter:
This adapter supports ISN reading and writing and data backup and recovery of BMW MSV90 - N20 Adapter:
This adapter supports ISN reading and writing, VIN modification and data reading and writing functions of the N20 and N13 of the F series chassis of BMW - B48/B58 Adapter:
This adapter supports ISN reading and data reading and writing functions of BMW models: MG1CS003, MG1CS024 and MG1CS201 - 271KE Adapter & 271DE Adapter:
These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE - 6HP & 8HP Adapter:
The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.
Package List:
- CG-FC200 Host
- DB15 Adapter
- Multifunctional Wiring Harness
- OBD Adapter
- USB Wiring Harness
- FC200 Adapter Set
including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
|
Test Blade: HU66 |
Chip: MEGAMOS 48 |
Compatibility:
| Audi A4 2002-2005 | Audi A6 2001-2004 | Audi A8 2001 | Audi S4 2002-2005 |
| Audi S6 2001-2004 | Audi S8 2001 | Audi TT 2001-2006 | Porsche 968 1999-2005 |
| Porsche Cayenne 2003-2010 | VW Beetle 2000-2005 | VW Cabriolet 2000-2005 | VW Eurovan 2001-2004 |
| VW Golf 2000-2006 | VW GTI 2000-2006 | VW Jetta 2000-2006 | VW Passat Sedan 2001-2005 |
| VW Passat Wagon 2003-2005 | VW Rabbit 2006-2009 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
|
Test Blade: HU66 |
Compatibility:
| Audi A4 2002-2005 | Audi A6 2001-2004 | Audi A8 2001 | Audi S4 2002-2005 |
| Audi S6 2001-2004 | Audi S8 2001 | Audi TT 2001-2006 | Porsche 968 1999-2005 |
| Porsche Cayenne 2003-2010 | VW Beetle 2000-2005 | VW Cabriolet 2000-2005 | VW Eurovan 2001-2004 |
| VW Golf 2000-2006 | VW GTI 2000-2006 | VW Jetta 2000-2006 | VW Passat Sedan 2001-2005 |
| VW Passat Wagon 2003-2005 | VW Rabbit 2006-2009 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
OEM Part Number:
Application:
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
- Specialized Design: Tailored for VAG MQB dashboard data reading to ensure accurate and efficient key programming.
- Comprehensive Compatibility: Works seamlessly with KD MAX key programmers ABK-5000 and the KD MATE OBD adapter ABK-5100. Suitable for major brands like VW, Audi, Seat, & Skoda.
- Future-Proof: Regular updates promise the addition of more modules & vehicles, ensuring the longevity of the device.
- User-Friendly Mobile App: Easy to navigate with clear instructions, the KeyDiy prog App provides essential wiring diagrams and procedures.
- Complete Kit: Comes with all the necessary components to get started, from the KD Mini Prog device to the quality certificate.
KEYDIY KD Prog Mini Functions:
- Read & Write MQB instrument cluster File with KD Prog Mini
- Calculate Anti-Theft Data for MQB
- Data repair for MQB instrument cluster
- Mileage repair for MQB instrument cluster
What is the KEYDIY Prog Mini C2 Adapter used for?
The KD Mini Prog C2 special adapter is a special component required for interfacing with various RH850 MQB dashboards. This adapter expands the device's capability to read and write data for a wide range of MQB instrument clusters, including multiple RH850 models such as:
- VAG MQB RH850 D70F3525 instrument cluster
- VAG MQB RH850 D70F3526 instrument cluster
- VAG MQB RH850 D70F3529 instrument cluster
- VAG MQB RH850 D70F3532 instrument cluster
- VAG MQB RH850 D70F3537 instrument cluster
- VAG MQB RH850 D70F3535 instrument cluster
- VAG MQB RH850 D70F3426 instrument cluster
- VAG MQB RH850 47F701401 instrument cluster
- VAG MQB RH850 47F701402 instrument cluster
- VAG MQB RH850 47F701404 instrument cluster
- VAG MQB RH850 47F701406 instrument cluster
- VAG MQB RH850 47F701407 instrument cluster
- and more will be added soon...
How to Use the KD Mini Prog:
- Weld the cable harness to the corresponding instrument position according to the diagram available in the Mobile KD app.
- Connect the KD Mini Prog wires, then link the KeyDiy Prog programming device with the KeyDiy KD Max programmer ABK-5000 or a compatible Android device.
- Launch the Mobile KD app and navigate to Immo Programming > KD Mini Prog to initiate MQB dashboard data reading.
- Ensure your KD-MAX or phone has sufficient power to guarantee successful reading.
- Once dashboard data is successfully read, begin key programming with the KD-Max Key programmer ABK-5000.
How to Activate the KEYDIY KD Mini Prog
Activating the KD Mini Prog is an easy process. You can activate the device using your KEYDIY Max programmer for 5000 KD-Coin. These coins can be earned by generating KD remotes and KD smart keys. If your KD Max programmer doesn't have enough KD-Coin, You can Purchase the KD Mini Prog Activation using your KD Mobile App.
Remember, the activation of your KD Mini Prog is essential to be able to use it with your KD Max Programmer to unlock its full capabilities and ensure smooth operation in your key programming tasks.
KD Mini Prog Box Contains:
- KEYDIY KD Prog Mini programming device
- KD Mini Prog Special cable harness
- KD Mini Prog C2 special adapter
- KD Mini Prog Adapter plate
- KD Mini Prog 0TG cable
- KD Mini Prog Quality certificate
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Lishi for Chrysler
Compatible
| 300c 2005 | PT Cruiser 1998 | Sebring 2007 | Voyager 1998 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Lishi HU162T(10) 2in1 Decoder and Pick is designed for VAG 2015 [10 CUT – 2 track internal (6 cuts) side cut (4 cuts)]
Compatibility:
| Volskwagen Golf7 2014 - 2015 | Volskwagen Polo 2014 - 2015 | Volskwagen GTI 2015 - 2021 |
Volskwagen Golf 2015 - 2021 |
| Volskwagen Jetta 2015 - 2021 | Volskwagen Atlas 2018 - 2021 | Volskwagen Tiguan 2017 - 2021 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Lishi HU162T(10) 2in1 Decoder and Pick is designed for VAG 2015 [10 CUT – 2 track internal (6 cuts) side cut (4 cuts)]
Compatibility:
| Volskwagen Golf7 2014 - 2015 | Volskwagen Polo 2014 - 2015 | Volskwagen GTI 2015 - 2021 |
Volskwagen Golf 2015 - 2021 |
| Volskwagen Jetta 2015 - 2021 | Volskwagen Atlas 2018 - 2021 | Volskwagen Tiguan 2017 - 2021 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Lishi HU66 (Twin Lifter) 2-in-1 Decoder and Pick is designed for VAG: VW, Audi, Porsche [Profile: HU66 (2 Track Internal)] Suitable for: Door, boot and Ignition locks
| 2017 Volkswagen Alltrack | 1998-2017 Volkswagen Beetle | 2009-2014 Volkswagen CC | 1998-1999 Volkswagen Cabrio |
| 2007-2015 Volkswagen Eos | 2000-2015 Volkswagen Golf | 2008-2010 Volkswagen GLI | 2000-2016 Volkswagen GTI |
| 2000-2017 Volkswagen Jetta | 2001-2016 Volkswagen Passat | 2004-2008 Volkswagen Phaeton | 2004-2007 Volkswagen R32 VR6 |
| 2009-2011 Volkswagen Rabbit | 2009-2017 Volkswagen Tiguan | 2004-2016 Volkswagen Touareg | 2006-2015 Audi A3 |
| 1996-2015 Audi A4 | 1996-2015 Audi S4 | 2001-2015 Audi A5 | 2001-2015 Audi S5 |
| 2001-2015 Audi A6 | 2001-2015 Audi S6 | 1997-2015 Audi A8 | 2001-2015 Audi S8 |
| 1999-2005 Audi Allroad Quattro | 2007-2015 Audi Q5 | 2007-2015 Audi Q7 | 2005-2007 Audi S6 |
| 2005-2007 Audi S8 | 2000-2015 Audi TT | 1999-2005 Porsche 968 | 1999-2009 Porsche 911 |
| 1999-2009 Porsche 912 | 1997-2011 Porsche Boxster | 2003-2010 Porsche Cayenne | 2006-2009 Porsche Cayman |
| 2004-2007 Porsche GT3 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
- Audi A4 2006-2010
- Audi A6 2007-2010
- Audi Q7 2007-2009
- Audi RS4 2007-2008
- Audi S4 2007-2010
- Audi S8 2007-2009
- Audi TT 2008-2009
- Volkswagen Beetle 2006-2009
- Volkswagen CC 2009-2013
- Vokswagen Eos 2007-2013
- Volkswagen Golf 2006-2007
- Volkswagen GLI 2008-2010
- Volkswagen GTI 2007-2013
- Volkswagen Jetta 2005-2013
- Volkswagen Rabbit 2006-2007
- Volkswagen Tiguan 2009-2013
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
|
BUTTONS: Lock | Unlock | Trunk | Panic
|
FCC ID: NBGFS12P01
|
FREQUENCY: 315 MHz
|
PN: 5G0 959 752 BE
|
|
CHIP: MQB 48 / MQB AES |
TEST KEY: HU66 |
INCLUDES FLIP KEY BLADE: FKB-VW-66 |
IC: 2694A-FS12P01 |
Compatibility:
|
Volkswagen GTI 2015-2019 |
Volkswagen Golf 2015-2019 |
Volkswagen Golf Alltrack 2017 - 2019 |
|
Volkswagen Golf R 2015-2019 |
Volkswagen Golf SportWagen 2015-2019 |
Volkswagen e-Golf 2015 - 2019 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
|
BUTTONS:
Lock | Unlock | Truck | Panic
|
FCC ID:
NBG010180T
|
FREQUENCY:
315 MHz
|
BATTERY:
CR-2032
|
Compatibility:
|
Volkswagen Beetle 2012-2016 |
Volkswagen CC 2011 - 2014 |
Volkswagen Eos 2011 - 2015 |
|
Volkswagen Golf 2011-2015 |
Volkswagen GTI 2011 - 2015 |
Volkswagen Jetta 2011 - 2016 |
|
Volkswagen Passat 2011-2015 |
Volkswagen Tiguan 2010 - 2014 |
Volkswagen Touareg 2011 - 2014 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Pinning Kit for Volkswagen Security HU66
| volkswagen 1997-2024 |
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
Compatibility:
This universal smart key will replace Honda, Buick, Ford, Cadillac, Nissan, Mitsubishi, Chevrolet proximity keys.
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines
It is compatible with all the VVDI tools including VVDI2 Mini Remote Programmer, VVDI Key Tool etc.
Have passed quality control before leaving the factory, with quality assurance, you can buy with confidence.
- Secure payments
- Shipping by UPS & USPS
- Warranty on Scanners and Machines