The BMW ISN reading cable is required to read the BMW ISN number on the bench without the car BMW ISN code is required when programming BMW CAS3+ all keys lost the smart key
Connect the BMW DME ISN reading cable with the BMW ECU and the BMW key programming device, and start BMW ISN reading procedures from BMW DME, BMW ISN reading is done without drilling a hole in DME for the BMW DME boot bin.
How to read BMW MSV80 ISN using the VVDI2 BMW key programmer
Connect BMW DME with the VVDI2 using the BMW ISN reading cable
Go to the key learn section in the VVDI2, then select ECU ISN reading
Select the BMW DME Type you need to read the ISN
Press Read BMW ECU information
The VVDI 2 will show you the BMW ECU info
Press Read BMW DME ISN
BMW ISN code reading required approximately 8 minutes
After BMW ISN reading success the VVDI2 will show the DME ISN code
Save the BMW ISN code to process with the BMW smart key programming
BMW ISN cable-supported DME (ECU)
BMW MSV80 ISN reading
BMW MSV801 ISN reading
BMW MSD80 ISN reading
BMW MSD81 ISN reading
BMW MSD802 ISN reading
BMW MSD812 ISN reading
BMW MSD851 ISN reading
BMW DME ISN reading cable is compatible with
Xhorse VVDI 2 programmer
Xhorse VVDI BMW programmer
BMW AutoHex III programmer
CGDI BMW key programmer
and other BMW DME ISN reading devices
BMW CAS ISN reading supported system:
BMW CAS3 ISN reading from DME
BMW CAS3+ ISN reading from DME
BMW CAS3++ ISN reading from DME
BMW CAS3+ ISTAP ISN reading from DME
BMW ISN reading cable-supported vehicles:
BMW E series DME ISN reading 2006-2014
BMW E90 DME ISN reading 2006-2014
BMW E92 DME ISN reading 2006-2014
BMW E60 DME ISN reading 2006-2014
BMW E87 DME ISN reading 2006-2014
BMW E89 DME ISN reading 2006-2014
Works with XHORSE VVDI2 or CGDI BMW, read out BMW ISN on bench Connect the Cable with ECU and device. Don't need drill hole for boot pin.